| After-sales Service: | 24 |
|---|---|
| Warranty: | 12 |
| Transmission Type: | Manual |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier | Chassis: | BJ1089VFJEA-F3 | Fuel type: | diesel fuel |
| Engine: | ISF3.8s4141; ISF3.8s4R141 | Rated capacity (kg): | 2000 |
| Displacement (cc): | 3760; 3760 | Wheelbase (mm): | 3360 |
| Power (kW): | 105; 105 | Dimensions (mm): | 6120 × 2115 × 2700 |
| emulsion explosive on-site mixing truck manufacture Chassis: | BJ1099VEJEA-FC | Fuel type: | diesel fuel |
| Engine: | ISF3.8s4154; ISF3.8s4R154 | Rated capacity (kg): | 3400 |
| Displacement (cc): | 3760; 3760 | Wheelbase (mm): | 3800 |
| Power (kW): | 115; 115 | Dimensions (mm): | 6925 × 2200 × 2600 |
Customize FOTON Underground Mining Blast Emulsion Mixing Charging Explosive Truck
BCJ-2000 underground on-site mixed loading light emulsion explosive truck (hereinafter referred to as underground truck is a small underground on-site mixed loading emulsion explosive truck refitted on the basis of special light truck chassis. It is a high-tech product of mechanical and electrical integration integrating raw material transportation, explosive mixing and blasthole loading. It can be described as a mobile micro efficient explosive processing plant.
Charge 3000kg
Charge efficiency 10-60kg\ mim
Measurement error ≤ 2%
Overall dimensions length/width/height (6120 × 2115 × 2700mm)
Diameter of hose (inner diameter × outer diameter) φ 22 × 334 mm or medium 25 × 40 mm
The diameter of loading hole is 40-100mm
Loading depth 40m
The direction of filling holes is omni-directional
Inlet and outlet hose speed 0-0.5 m/s (adjustable)
|
BCJ-1000 /BCJ-2000 /BCJ-3000 Main Tech |
|
|
Delivery efficiency |
10kg/min~60kg/min |
|
Measurement error |
±2% |
|
Dimensions Length × width × height (mm) : |
6120×2115×2700 |
|
Car chassis |
FOTON BJ1089VFJEA-F3 / 4×2 |
|
Engine type |
ISF3.8s4141 |
|
Engine power |
105KW |
|
displacement |
3760ml |
mixing and charging truck FOTON Euro 5 Chassis : BJ1089VEJEA-A2
Main technical parameters
|
Overall dimensions: |
6000×2100×2620(mm) |
Fuel Type: |
Diesel oil |
|
GW |
8000(Kg) |
||
|
NW |
5805(Kg) |
Rated load mass: |
2000(Kg) |
|
Approach Angle/Departure Angle: |
21/13 (°) |
Front/rear overhang: |
1095/1545,1110/1530(mm) |
|
Axle Load: |
2840/5160 |
Wheelbase: |
3360,3800(mm) |
|
Number of shafts: |
2 |
Maximum speed: |
80(km/h) |
|
Number of tires: |
6(PCS) |
Tire Specifications: |
7.50-16LT 14PR,7.50R16LT 14PR,8.25-16LT 14PR,8.25R16LT 14PR |
|
Fuel consumption: |
(18.2 L / 100 km) |
Number of spring pieces: |
3+1/6+7,9/11+7,3/7+6,3/8+6 |
|
Front wheel base: |
1730,1685,1590(mm) |
Rear wheel base: |
1590,1615,1485(mm) |
|
Engine type |
Engine manufacturer |
Volume (ml) |
Power (kw) |
|
|
ISF3.8 s5154 |
Beijing Foton Cummins Engine Co., LTD |
3760 |
115 |
|
|
For Mixing Charging ammonium nitrate emulsion and ammonium nitrate, equipped with front exhaust system The special operating device PTO emulsion matrix box, pumping and feeding hose system, etc. The semi-finished products and various raw materials are mixed in a certain proportion and loaded into the borehole, and the mixture reacts with each other to form emulsion explosive. |
||||
Customize FOTON 4T Bulk ANFO Blend Emulsion Explosive Trucks
FOTON mixing and charging truck Euro 6 Chassis :BJ1108VFJEA-FK
|
Overall dimensions: |
6950×2180,2160×2410(mm) |
Fuel Type: |
Diesel oil |
|
Total mass: |
9995(Kg) |
Load mass utilization factor: |
|
|
Quality of service: |
5610(Kg) |
Rated load mass: |
4190(Kg) |
|
Approach Angle/Departure Angle: |
15/13(°) |
Front/rear overhang: |
1130/2020(mm) |
|
Axle Load: |
3600/6395 |
Wheelbase: |
3360,3800(mm) |
|
Number of shafts: |
2 |
Maximum speed: |
80(km/h) |
|
Number of tires: |
6(PCS) |
Tire Specifications: |
9.5R17.5 16PR,8.25R16LT 16PR,8.25R20 14PR |
|
Fuel consumption: |
15.4(L/100Km) |
Number of spring pieces: |
9/8+6,3/4+3,3/8+6 |
|
Front wheel base: |
1710,1715,1730(mm) |
Rear wheel base: |
1615,1630(mm) |
|
Engine type |
Engine manufacturer |
Volume (ml) |
Power (kw) |
|
F3.8NS6B156;D30TCIF1
|
Beijing Foton Cummins Engine Co., LTD.; Kunming Yunnei Power Co.,Ltd. |
3800;2977 |
115;125 |
The main special device of the vehicle is composed PTO, Emulsion matrix box, fuel system, screw pumping system, hydraulic system, computer digital control system, etc., which is mainly suitable for filling explosives in water holes in open-pit mines. The system operation is carried out by conveying pump, rear telescopic cantilever and feed pipe, and the reasonable proportion of explosives can be accurately filled in the drill holes Quality, ammonium nitrate latex matrix category item No. 5.1, the vehicle transport dangerous goods vehicle type is AT type. The vehicle is a transport vehicle for dangerous goods, equipped with dangerous goods signs and dangerous goods sign lights, equipped with disc brakes, and all steering wheels are equipped with emergency protection devices for burst tires. Radial tire. Electrostatic drag strip. front exhaust system.
| Rated capacity | 30t |
| Gross weight | 51.525t |
| Front axial load | 17.175t |
| Back axial load | 34.35t |
| Minimum ground clearance | 475mm |
| Minimum turning radius | 8.7m |
| Engine maximum power | 256Kw |
| Loading minimum running speed | 50Km/h |
| № | Name | Specification | Unit | Quantity | Standart | Note |
| 1 | Type /Mark/ | SINOTRUCK HOWO BCZH-15 | ||||
| 2 | Model | Mixing charge machine for emulsion explosive /HEAVY ANFO TRUCK/ | ||||
| 3 |
Техникийн злэлт |
Chassis | BRAND: SINOTRUCK HOWO |
|||
| Engine capacity | kwt | 340 more | ||||
| Fuel type | Diesel Euro-II; Euro-III | |||||
| Drive wheel formulation | 8х4 | chassis | ||||
| Wheel formula | mm | 1950+3800+1400 | ||||
| Cabin | Without sleeping bed | |||||
| Engine | MAN MC 340HP | |||||
| Transmission | HW19710 transmission + HW70 flange type power take- off |
|||||
| Front axle | MAN VPD060QB front axle (disk) | |||||
| Chimney system | Smoke evacuation (with fire lid) | |||||
| Tires | 12.00R20 /steel tires/ | |||||
| Fire extinguisher | one pieces for machine, two pieces for equipment | |||||
| Warnings | Hazardous freight warnings according to Mongolian law and regularity must be sticked /4 sides of the machine / | |||||
| Amber light | On the cabin-1 pieces Equipment -1 pieces |
|||||
| Other directions | PTO option: /front and bottom protection/ Speed limiter device, speed limit 60 km/hour |
|||||
| Brake system | ABS (4S / 4M) | |||||
| Fuel tank | Min-200 L / aluminum alloy fuel tank/ | |||||
| Others | / The vehicle meets the conditions of adapting to the working conditions of the plateau and cold regions./ |
|||||
| Steering wheel | Left HT457 rear dual drive axle (drum) |
|||||
| № | Name | Specification | Unit | Quantity | Standart | Note |
| Axle's loading capacity | kg | 6500кг / 7000кг / 17500к | ||||
| Loading | kg | Not less than 15000 | ||||
| Over all weight | kg | Not less than 32000 | ||||
| Dimension of the machine and equipment | mm | Max-Length /10360, Width 2500 , Height 3750 | ||||
| Mixing charger device of material | Stainless steel | |||||
| Amount of explosives | kg | 15000 | Min | |||
| Emulsion/ANFO ratio | % | 70/30 | ||||
| Borehole charging depth | m | 20-30 | ||||
| Borehole charging speed | kg/min |
150-260 |
Min |
|||
| Measurement error, | % | ± 2 | ||||
| Borehole charging diameter | mm |
70-320 | ||||
| Storage tank for produced emulsion /equipment/ |
M3/kg/ |
Min-8,4 /10500/ |
||||
| Porous ammonia container /equipment/ |
M3/kg |
Min-3,4 /4500/ |
||||
| Water tank volume, /equipment/ |
м3 |
Min-0,4 |
For water curtain hose | |||
| Sensor tank volume /equipment / |
м3 |
Min-0,5 |
||||
| Volume of sodium nitrite storage tank /equipment/ |
м3 |
Min-0,2 |
||||
| Diesel fuel tank volume, /equipment/ |
м3 |
Min-1,0 |
||||
| Charger hose length | м | Min-25 | ||||
| Location of tank loading | Pour over the tank loading | |||||
| Water jacket creating system | ||||||
| NO. | Code | Title | Qty. |
| 1 | BCZH20.6-1 | Centre plate wood block | 1 |
| 2 | BCZH20.6-2 | Polystyrene plate | 1 |
| 3 | BCZH20.6-3 | Strengthen channel steel | 6 |
| 4 | BCZH20.6-4 | Lower horizontal channel steel | 2 |
| 5 | BCZH20.6.1 | Tank shell unit assembly | 1 |
| 6 | BCZH20.6-5 | Polystyrene filler block | 54 |
| 7 | BCZH20.6-6 | Middle horizontal channel steel | 2 |
| 8 | Polyurethane coating | 1 pail | |
| 9 | BCZH20.6-7 | Coupling flange | 4 |
| 10 | GB5782-86 | Bolt M18×160 | 4 |
| 11 | GB6170-86 | Nut M18 | 4 |
| 12 | GB97.1-85 | Washer 18 | 4 |
| 13 | GB93-87 | Washer 18 | 4 |
| 14 | BCZH20.6.2 | Walk bedplate assembly | 1 |
| 15 | BCZH20.6.3 | Vent cap | 1 |
| 16 | BCZH20.6-8 | Vent cap connection tube | 1 |
| 17 | BCZH20.6.4 | Manhole cover assembly | 1 |
| 18 | CKB/J01-87 | Quick tie-in: DC-ZG2 | 1 |
| 19 | BCZH20.6-9 | 2Tie-in | 1 |
| 20 | Quick tie-in: A-ZG2 | 1 | |
| 21 | BCZH20.6-10 | Upper horizontal channel steel | 2 |
| 22 | BCZH20.6-11 | U-shaped bolt M24 | 4 |
| 23 | GB6170-86 | Nut M24 | 8 |
| 24 | GB97.1-85 | Washer 24 | 8 |
| 25 | GB93-87 | Washer 24 | 8 |
| 26 | BCZH20.6-12 | Cushion block | 4 |
| 27 | DEMCO3X175PST | Butterfly valve 3 | 1 |
| 28 | BCZH20.6.5 | Emulsion tank assembly | 1 |
| 29 | BCZH20.6-13 | Lower backing channel steel | 6 |
| 30 | BCZH20.6-14 | Upper vertical channel steel | 2 |
| 31 | BCZH20.6-15 | Lower vertical channel steel | 2 |
| 32 | BCZH20.6-16 | Girder backing channel steel | 2 |
| 33 | BCZH20.6-17 | Bottom channel steel | 6 |
| 34 | BCZH20.6-18 | Wood stopper | 70 |
| 35 | BCZH20.6-19 | Lower erect channel steel | 14 |
| 36 | BCZH20.6-20 | Upper erect channel steel | 14 |
| 37 | BCZH20.6.6 | Tank inner lining assembly | 1 |
| 38 | BCZH20.6-21 | Pass wire pipe | 1 |
| 39 | Clearance lamp side light | 2 | |
| 40 | BCZH20.6-22 | Clearance lamp side light frame | 2 |
| 41 | BCZH20.6-23 | Middle vertical channel steel | 2 |
| 42 | BCZH20.6-24 | Sealing plateδ4 | 1 |
1.Are you trading company or manufacturer ?
We are Group Corporation manufacturer ,have Group Factories Contractor.Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}