Customizing Truck Upper Body Hydraulic Garbage Compactor SKD 4cbm - 20cbm

• After-sales Service: 24
• Warranty: 24
• Transmission Type: Manual
• Power: Diesel
• Load Capacity: 11-20t
• Emission Standard: Euro 3-5 -6 -7
• Model NO.: Garbage Compactor Truck Body
• Tank Volume: 3000L-18500L
• Drive Wheel: 6 Wheels, 10 Wheels
• Seats: ≤5
• Horsepower: 150-250hp
• Engine Capacity: 4-6L
• Storage: Concrete Cement
• Tire Design: Tubeless
• Condition: New
• Size: 6058*2438*2591mm
• Transport Package: Road
• Specification: 3000L-18500L
• Trademark: DRAU
• Origin: Cn
• HS Code: 8707909000
• Production Capacity: 3000

Product Description

Customizing Hydraulic Garbage Compactor Truck Body SKD 4cbm - 20cbm

 

The pictures are for your reference only.   







 

Compactor garbage truck information : 

 

Refuse compactor structure parameters
Equipment
Structure	Body, sub frame, lifting rear part, the loading device, the pushing-out plate, hydraulic and electric systems
Loading capacity	8m3,10m3,-20m3      Compactor Body 4m3 Compactor Body 6m3 Compactor Body 8m3 Compactor Body 10m3 Compactor Body 12m3 Compactor Body 16m3 Compactor Body 18m3
System of loading	Mechanized, rear loading
Modes of the pressing	Manual,semi-automatic,automatic,lifting rear part operation manual,loading,pushing,pressing, pushing out automatic
Body
Version	All-metal
Shape	arc-shaped
Sidewalls	Q345 Sheet carbon steel (thickness: 4mm)
Bottom	Q345 Sheet carbon steel (thickness: 4 mm)
Roof	Q345 Sheet carbon steel (thickness: 4 mm)
Front frame	Q345 Sheet carbonaceous steel (thickness: 5 mm)
Rear frame	n-shaped profile from sheet carbon steel (thickness:5 mm)
Basis	120x120mm (thickness: 5 mm)
Loading bunker
Loading bunker	All-metal with sidewalls and a loading ladle
Volume	1.0 m3
Sidewalls	Q345 Sheet carbon steel (thickness: 6 mm)
Scraper&pushing-out plate	Q345 Sheet carbon steel (thickness: 8 mm)
Liquid drain	Drainage channel,sewage tank
Working zone Lighting	2 lamps
Mechanism of raising	Two hydraulic cylinders
Ensuring tightness	Between the body and lifting back part in the lower part profile acid-proof rubber is used.
Pressing system
Features	Control mode diversification,bidirectional compression
Pressure	16Mpa
Compaction ratio	4.0:1
Loading cycle	25-30 second
Unloading cycle	25-35 second
pressing mechanism	The giving plate and hinge related pressing plate moving on two directing bars
Pressing mode	Automatic pressing (1 full cycle and continuous pressing) and controlling of each cycle of pressing separately
Control of  pressing	Control from the external panel on the bunker
Lifting rear part
Mechanism of lifting	Two hydraulic cylinders
Function description	Suitable for various rubbish bins
Others
Color and Logo	Optional
Standard configuration	Chassis,arc-shaped body,sub frame,rear lifting part,loading bunker,pushing-out plate,hydraulic system,pressing system,sewage tank,climbing ladder,pneumatic control,PLC electric automatic control.
Selective configuration	multifunctional rear lifting part,rear handrail and footplate,other shapes of body,rear swing arm,and etc.

 

1.Upper unit installed on the chassis ,connection part is longitudinal beams on rubber pads

2.Exhaust plate in the front wall of the body ,and a rear side with a press mechanism

3.Three type of body shape .Bottom plate is reinforced by longitudinal beams

4.Push -out board is supported of the telescopic cylinder

5.Foot board &handle for maintain pipeline on the roof

6.Fluoro plastic slider for push-out plate

7.The rear hopper made of high quality steel and 6mm thickness ,mechanically and manually load the bucket ,raised by two cylinder

8.Hydraulic valve &plc made in Japan ,automatically distribute hydraulic oil to the cylinder as working status

9.The pressing mechanism works in automatic ,semi-automatic and manual modes . operation can single or chitinous

10.Colour & pattern as required

11.An additional push-button control unit in cab ,and buzzer in the cab for keep in touch with the operator at the rear of the garbage truck

12.Two button at the side of the body for emergency stopping

13.Spare switch ensure the operation continue going when the vehicle has malfunction

14.More kinds of lifting device

15.Safety road,monitor ,caution sign

16.Rear door ,front door ,lock hook

17.Leak proof device---no dirty water leak& omit

Wheelbase we use	3300 mm , 3360 mm,4500mm,5100mm,.....
Compactor capacity	6000 Liter
Sewage water tank	250 L
Material	High strength carbon steel
Horsepower advice	120 hp
Voltage of chassis battery	12V / 24 V
Truck body equipment
Equipment	1.Equipped with hermetic dustbin,hydraulic systerm and operation system 2.Automatic compress and uninstall,sewage can be collected by the dump tank. 3.Pressure is large,leakproofness is good,operation is convenient and security is demendable 4:waste water tanker 160Liters 5:truck wheelbase:4500mm Garbage body Material: 16 Low alloy steel Garbage boday welding by 8mm,5mm,4mm and 16Mnr steel Hydraulic system : Electric magnetic valve   TG3522-02U Cylinder :MAL25X50 Combination valve: 34DLS-10-P-0000 Lift bin oil cylinder: HSGK01-63/35-700X450 Push plate  oil cylinder : DJG-150III-1150X2170 Scraper plate oil cylinder:HSGK01-80/45-700X300 Sliding plate oil cylinder:DJG-115II-1000X1020 The negative pressure oil cylinder:HSGK01-63/35-500X300 Lifting bin oil cylinder: HSKG01-90/63-832X500 Hydraulic oil fliter :ZUT-A63X20 Stop valve:Q11F-16P Hydraulic oil pump :CBT-F532FHL Hydraulic gauge:YN-60 40Mpa Air cleaner: TW2000-02U Air pressure gauge : 0- 1.0mpA

5CBM Compactor garbage truck body

Overall dimension(mm)		4330×1856×2289
Compactor Body	Body dimensions(mm)	2170×1730×1330
	Volume	5M3
	Body Floor steel	5mm manganese steel
	Body Roof steel	4.5mm manganese steel
	Body Side Plate steel	4.5mm manganese steel
	Ejection Plate steel	Ejection Plate steel
	Hydraulic valve	Imported Japan
Water Tank	Volume	150-600L
	Material	stainless steel
Hopper	Volume	1M3
	Hopper Loading Height	920mm
	Side Plate steel	5mm
	Floor Plate steel	5+3mm
	Press Plate steel	3& 5mm
	Safety	2 Pcs safety bars for hopper
Working Specification	Control mode	Automatic +Manual
	Compaction ratio	1:3
	Time for single loading cycle	10-11s
	Time for single discharge cycle	<18s
	Max broke force of compression	16T

Certifications

Packaging & Shipping

FAQ

 1.Are you trading company or manufacturer ? 

         We are Group Corporation manufacturer ,have Group Factories Contractor.

  2 .Can I have samples of this type of product to test the quality?
      Yes, you can buy any sample to test the quality,our MOQ is 1 unit.

  3. What's the delivery time and can you lower the price? 
    It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
 

4.Can you supply some quick-wear parts? 

Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
 

6.Do you have any used products for sale? 

We have products in stock for choices,the prices are favorable,we'll show you our stock products if you need. 

7.What's the payment terms?

 TT 30% as deposit, balance before shipment by TT or at sight.

8. How to guarantee customers get the goods smoothly after they payment? 
Don't worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don't delivery products, the deposit will be returned to you. 

9.How can you ensure the quality of the products? 

Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.

 

Cell :[phone]