| Customization: | Available |
|---|---|
| After-sales Service: | 24 |
| Warranty: | 24 |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Crane mounted slickline vehicle
The crane is mounted in the center of the rear end in order to balance thegravity of the vehicle on the left and right sides and ensure safe driving.Equipped with four H-type outriggers (front and rear pairs) and a 13T crane, this vehicle surpasses other competitors in China with its exceptional performance. It offers a range of working spans and heights to meet different well testing requirements in different regions.The transmission system incorporates imported pumps, motors and reducers, and the metering system is supplied by internationally renowned brands.The vehicle is suitable for high-speed impact operations in gas wells, water well slickline pressure test, and recovery operations.
Basic parameters and performance of Derrick Truck Crane:
| Items | Parameters |
| Maximum lifting moment | 330kN·m |
| Maximum lifting weight of basic arm | 13t |
| Maximum arm length | 18.75m |
| Maximum lifting height | 20.2 m |
| Dead weight of crane | 4.6t |
| Maximum working pressure of crane | 26MPa |
| Rated flow of hydraulic system | 80+40 L/min |
| Hoisting speed | 12m/s |
| Operation mode | Manual/standing control at right rear position of vehicle |
| Outrigger structural form | Double chamber telescopic square box leg |
| Rotary range | 360 ° All rotary |
| Safety device | Overload protection (unloading), overwinding protection (unloading), overflow valve, lifting balance valve, rotary balance valve, amplitude balance valve |
| Lifting mechanism | Single lifting mechanism, hydraulic motor + planetary mechanism (normally closed brake) |
| Hook position | Between cab and carriage |
| Telescopic boom | 1 Basic boom and 5 telescopic boom, synchronous expansion |
| Items | Parameters | |
| Winch | Capacity | Slickline 7000m (Φ2.8mm) |
| Lifting capabilities | 20kN | |
| Lifting speed | Slickline 120-20,000m/h (impact & recovery operations) | |
| Transmission form | Hydraulic chain | |
| Hydraulic System | Rexroth/DANFOS S | |
| Metering system | Benchmark/ASEP/local brand | |
| Chassis | Sino Truck ZZ1257N464HF1(HOWO ) | |
| Drive form | 6*4 | |
| Crew | 2persons | |
| Overall dimensions | L x W x H: 9450mmx2500mmx3900mm | |
| Wheelbase | 4325mm+1350mm | |
| ENGINE | Model | MC11.40-61 |
| Capacity | 297kW, 1900r/min | |
| Max. torque | Maximum torque output 1900N·m at 1000~1400r/min | |
| Gearbox | HW19709XST, with synchronizer | |
| Gross mass | 25T | |
| Max. speed | 90km/h | |
| Approach angle | 20° | |
| Departure corner | 11° | |
Crane mounted slickline truck , Dual power well testing vehicle
| Overall the Truck | Dimensions of the Truck | L *W *H :10050×2500×3950mm |
| Total Mass | 25000kg | |
| Curb Weight | 24470kg | |
| Structural Form | Crane 'mounted slickline unit truck | |
| Chassis | Model Number | Sinotruk ZZ1257N464HF1 |
| Drive Type | 6x4 | |
| Power | 294kW/ 1900rpm | |
| Emission | China VI b Emission Standard | |
| Seating Capacity | 2 | |
| Crane | Rated lifting capacity | 13T |
| Maximum Working Radius | 21.2m | |
| Maximum Lifting Height | 22m | |
| Skid Body | Layout | Split Skid |
| Material and Forming | Carbon structural steel welding | |
| Attachments | Stainless steel door lock | |
| 3C tempered glass window | ||
| Standard container lock | ||
| Hydraulic System | Brand of Pumps and Motors | Rexroth |
| Control Form | Hydraulic Control | |
| Handle | Double Lever Handle | |
| Winch Assembly |
Capacity of Rotating Drum | 0.16 " Slickline,25000ft |
| Reel maximum pull | 4400lbs | |
| Lifting speed | Slickline 120-20,000m/h (impact & recovery operations) | |
| Engine | Model | CumminsB3.9CS4 110C |
| Maximum power | 81KW@2500RPM | |
| Volume of Diesel Tank | 180L | |
| Electrical system |
DC 24V | From Battery |
| DC 24V Electrical Equipment |
External Left and Right Floodlights1*26W | |
| Power Cabin Light, Winch Cabin Light, and Rotating Drum Light3*12W | ||
| DC Light for Operation Cabin1*8W | ||
| Wellhead Explosion-proof Light2*50W | ||
| Hydraulic Oil Cooling Fan300W | ||
| Measuring Panel, Electric Valve, Instrument and Fan | ||
| PCE | Control Double GateBOP | Pressure3000psi |
| Control STUFFING BOX | Pressure3000psi | |
| Measurement System | Depth | Mechanical + Electronic |
| Tension Meter | Hydraulic + Electronic | |
| MP20 | 20-inch measuring wheel, It is suitable for high-speed jolting operations in gas wells. |
The truck-mounted crane is set in the center at the rear end of the truck, and the center of gravity of the whole truck is maintained on the center line. So the driving safety can be guaranteed. The installed 13T crane is equipped with H-type four outriggers. This truck will be able to meet well testing requirements of the working range and working height in various areas. The power unit and winch unit of this equipment are independently and standardizedly designed for interchangeable use among multiple sets. The two units can be tested on the vehicle platform and also be lifted as a whole onto the ground to complete testing operations.The pumps, motors and reducers of truck's transmission system are all imported brands, and the metering system adopts the one from international famous brand. This derrick truck is suitable for high-speed jolting operations in gas wells, slick line pressure testing in water wells, and other pulling and running operations.
Based on the second-class chassis, the truck is refitted by adding platform, diesel engine, clutch, transmission, triplex cylinder plunger pump, water tank, truck-mounted special boiler, burner, air supply system, pump suction and discharge piping, boiler inlet and outlet pipelines, driving system, hydraulic system, air source system, control system and so on. The truck is mainly used for thermal washing and broken down of oil production well; high pressure well washing and pressure testing; paraffin removal of pipe and pole cooperate with workover operations. It's also widely used for heating other medium, unclogging and unfreezing surface pipeline and cleaning equipment and so on. Optional parts: VOLVO engine, Carter engine, Detroit engine, hydraulic torque converter, ZF gearbox, 400hp pump, 700ph pump. Optional chassis: Beiben(6×4, 6×6), Shanqi(6×4, 6×6), Sinotruck(6×4, 6×6), Dongfeng(6×4, 6×6).China Boiler Truck Mounted Dewaxing of Well with Hot Oil 6MPa Steam Generator Truck High Temperature for Flushing Tube Casin
1.Are you trading company or manufacturer ?
We are Group Corporation manufacturer ,have Group Factories Contractor.Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.
){kind=link}