Shacman M3000 Recovery Rescue Tilt Tray Rollback Flatbed 18t Wrecker Tow Truck Mounted with 10ton Folding Boom Crane

Product Description

 Shacman M3000 Recovery Rescue Tilt Tray Rollback Flatbed 18T Wrecker Tow Truck Mounted with 10Ton Folding Boom Crane

Flatbed Tow Truck | Slide | Rollback | Tilt Tray 

Shacman Delong 6×4 wrecker equipped with a folding arm truck-mounted crane (also known as rear double-axle wrecker with crane), featuring the New M3000 cab. It is available in two chassis versions: Enhanced and Cost-Effective, matched with professional upper loading equipment, a full set of accompanying accessories and a folding arm crane with a large working range, suitable for various heavy-duty rescue and hoisting scenarios. The specific configurations are as follows:

 

1. Chassis Configuration

 

Enhanced Version

 

• 6×4 drive, equipped with a Weichai 350hp engine and a Fast 12-speed synchronized transmission
• 7.5T front axle + 16T wheel-side reduction rear axle, with a speed ratio of 4.266; fitted with dual differential locks (excellent mud terrain escape capability) and dual-circuit braking (improves braking performance and driving safety)
• Wheelbase: 5775+1400mm; 308mm 8+5+8 integral three-layer frame; 12.00R20 steel wire tires
• Comfort & safety features: Air conditioning, air suspension seats, remote control key, power windows, driving recorder and ABS

 

Cost-Effective Version

 

• 6×4 drive, equipped with a Weichai 270hp engine and a Fast 9-speed synchronized transmission
• 5.5T front axle + 11.5T rear axle; the same speed ratio, braking system, differential locks, frame and wheelbase as the Enhanced Version
• 11.00R20 steel wire tires
• Consistent comfort and safety configurations with the Enhanced Version

 

2. Upper Loading Configuration

 

• Class A yellow plate wrecker with one-tow-two design, adopting a sunk process (built-in oil cylinder)
• Equipped with an 18T wrecker flatbed and an 18T three-section rear lifting arm
• Core components: Imported Italian Hydrodyne valves, 15T hydraulic winch (with 40m steel wire rope), domestic double oil cylinders for flatbed telescoping
• High-strength structural design: 16mm manganese steel plate for flatbed frame (with large waist-shaped holes), 8mm thick checkered steel plate for the platform; reinforced with dense keel frame, strengthened subframe, dense diagonal supports
• Double-layer 12+12mm thick slide rails (reinforced with an additional square tube and large triangular brackets on the side)
• Flatbed dimensions: Total length 8.7m, width 2.55m (hydraulic extension optional), ground clearance 1460mm; 1.4m hydraulically flip-up tail
• Operation system: Dual-side linked control device

 

3. Accompanying Accessories

 

• 2 rear work lights
• 1 set each of L-type tire clamps, auxiliary trolleys and tire guards
• 6 tie-down straps
• 1 set of tow fork bases + 3 sets of tow forks (1 set each for high/medium/low positions)
• 1 set of external air sources (additional installation) + 1 tool box

Shacman Delong 6×4 Wrecker with 12 Ton Folding Arm Crane

 

This is a heavy-duty integrated towing and hoisting wrecker, built on the Shacman Delong (New M3000/F3000) chassis. It integrates flatbed wrecker and truck-mounted crane functions, featuring dual functionality in one vehicle. It efficiently meets the towing and hoisting needs of heavy accident vehicles and engineering equipment, serving as a core piece of equipment for road rescue and engineering logistics.

 

Core Configuration (Standard Version)  

Module	Key Parameters	Description
Chassis	6×4 drive (rear double axle)	Equipped with Shacman Delong New M3000 cab, Weichai 270/350 hp engine, and Fast 9/12-speed transmission
Load-bearing System	7.5T front axle + 16T wheel-side reduction rear axle	Double/three-layer straight frame, 12.00R20 steel wire tires, and dual differential locks, delivering strong off-road and heavy-load capacity
Wrecker Superstructure	18T flatbed + 18T three-section rear lifting arm	Adopts a sunk oil cylinder design; the flatbed measures 8.7m×2.55m with hydraulic extension function, and is equipped with a 15T hydraulic winch (40m steel wire rope)
Crane	10-16T folding arm truck-mounted crane	Maximum lifting height of 14.9-20m, working radius of 11.5m, with remote control operation, adaptable to multiple scenarios
Hydraulic System	Italian Hydrodyne valves + domestic heavy-duty oil cylinders	Stable and durable with low failure rate, enabling precise control of operation rhythm
Accessories	Tire clamps, tow forks, tie-down straps, tool box	Complete set of rescue accessories, meeting the operational needs of one-tow-two and multiple working conditions

 

Core Advantages

 

1. High Efficiency & All-round Performance: Integrated flatbed towing and truck-mounted hoisting eliminates the need for dispatching two separate vehicles, directly improving rescue and transportation efficiency.
2. Compliant Heavy Load Capacity: With yellow plate qualification and a total mass of 25-30 tons, it is suitable for all-terrain travel on highways, construction sites, mountainous areas and other terrains.
3. Reliable & Durable: Reinforced three-layer frame structure and imported core hydraulic components, making it suitable for high-intensity and long-cycle operations.

4. Crane Configuration

• Folding arm truck-mounted crane with a maximum working radius of 11.5m and a maximum lifting height of 14.9m
• Advantages: Large working radius, multi-angle operation, strong versatility, adaptable to various rescue and hoisting scenarios

Shacman 6x4 18Ton Flatbed Road Emergency Rescue Wrecker Tow Truck Crane 10Ton 12Ton 16Ton Folding Boom Crane Available

General
Truck Name	Wrecker / Recovery Truck	Overall Dimension (mm)	12000×2550×3900
Truck Brand	Dongfeng/Foton/FAW/1SUZU	Gross / Curb Weight (kg)	25000/ 20900
Chassis
Chassis Brand	Shacman	Flatbed Load	15/16/18Ton
Crane Type	Telescopic boom crane	Crane capacity	12/14/16ton
Wheel Base (mm)	5775+1400	Traction System	6x4
Transmission	manual	Front / Rear axle load (KG)	7000/9000/9000
Tyre Model	12.00R20	Quantity of Tyre	6
Engine (Motor)
Brand	WEICHAI	Displacement (ml)	4500-6800
Horse Power	270-350HP	Emission Standard	Euro 3/4/5/6

 FOTON HOWO 50T-60T Tow Wrekcer Heavy Duty Rotator Recovery Truck 8x4 ETX3134 AUMAN 12 Wheelers 

Wheel Base	Engine Power	Max Towing	Under Lifting System		360 degree rotator  Boom System		Winch		Outrigger
mm	kM	kg	Max Hoisting kg	Max Hoisting All Extended kg	Max Lifting kg	Max Height mm	Qty.	Rated Of Pulling For Each One kN	F OutriggerSpan mm	R Outrigger Span(mm
1995+4405+1370	339	41000	26000 26000	12000 12000	50000 60000	7800 10000	2 2	200x2 250x2	6600 FRONT 6690	4080(Rear 4840
1800+4600+1350	276	43000	16000 26000 25000	8700 12000 8500	40000 50000 40000	7000 7800 7000	2 2 /	150x2 200x2 150x2 90x2 45x1	6600  6600	4080  4080  4580
1800+4600+1350	276	31000	16000  26000	8700 12000	40000 50000	7000  7800	2   2	150x2 200x2	6600  6600	4080  4080
1950+4625+1350	297	44000	16000 26000	8700 12000	40000 50000	7000 7800	2 2	150x2 200x2	6600  6600	4080(  4080

Wheel Base	Engine Power	Max Towing	Integrate recovery truck  Under Lifting System		Boom System		Winch
mm	kM	kg	Max Hoisting kg	Max Hoisting All Extended kg	Max Lifting kg	Max Height mm	Qty.	Rated Of Pulling For Each One(kN
1950+3625+1375+1350	327,400	53000	35000	13000	50000	6860	2	250×2
1800+4600+1350	276	31000	26000	11000	50000	6700	2	200×2
1800+4600+1400	287	43000	26000	11000	50000	6700	2	200×2
5900+1400	257	34000	16000	8000	20000	6500	2	100×2
5900+1400	257	34000	16000	8000	20000	6500	2	100×2
5900+1400	257	34000	16000	8000	20000	6500	2	100×2
5825+1350	249,276	25000	16000	8000	20000	6500	2	100×2
1800+4600+1350	276	31000	26000	11000	50000	6700	2	200×2

  

(mm)	(kM)	(kg)	Max Hoisting(kg)	Max Hoisting  All Extended(kg)	Max Lifting(kg)	Max Height(mm)	Qty.	Rated Of Pulling  For Each One(kN)	(F) Outrigger Span(mm)	(R) Outrigger Span(mm)	P.S
1950+4625+1350	297	44000	16000 26000	8700 12000	40000 50000	7000 7800	2 2	150x2 200x2	6600  6600	4080   4080	/

Rescue Heavy Duty HOWO 360 Degree Rotator Recovery Towing 50t-60ton Wrecker Trucks

Foton 50t-60t Tow Wrekcer Heavy Duty Rotator Recovery Truck 8X4 Etx3134 Auman 12 Wheelers

Heavy Duty 20-30ton Sinotruck HOWO 6X6 Offroad Recovery Vehicle Towing Wrecker Truck

 

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities. 

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
3308	75	4495	/	/	4230+88 0 4170+1000	2280	7	2700	2000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
3360	72	4495	/	/	4230+880 4170+1000	2280	7	2700	2000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
3800	115/ 95/ 105	8275	3000	1500	5560 5440+1035	2380	8 2	2700 ALL	3000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
3800	115	8280	3000	1500	5560 5440+1035 5560	2380	8 2 4	2700 ALL ALL	3000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
4150	96	8280	3000	1500	5560	2380	8	2700	3000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
3815	112	8210	3000	1500	5560 5440+1035 5560	2380	8 2 4	2700 Full Full	3000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
3800	103	8280	3000	1500	5560	2380	8	2700	3000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
4500	121	8490	3000 3500	1500 2000	6000 6350	2380	8	2700 3290	3000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
4475	141 15	10000	3500	2000	6350 6400	2480 2380	8 2	3290 ALL	5000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
5200	141	10000	3500	2000	7600	2480	8	3600	5000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
4700	115	10000	3500	2000	6350	2480	8	3290	5000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
4700 5000	132	12490	3500	2000	6350 7160	2480	10	3290	5000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
4700	125	9990	3500	2000	6350 6400	2380	8	3290 ALL	5000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
4700	125	13495	3500	2000	6350 6400	2480 238	10 2	3290 ALLA	5000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
4700	132	12490	3500	2000	6350	2380	10	3290	5000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
5200	132	13490	3500	2000	7600 8000	2480	10	3600	5000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

wheel base	engine power	max towing	under lifting system		flat bed				Winch
(mm)	(kw/r/min)	(kg)	max hoisting(kg)	max hoisting all extended(kg)	Length(mm)	Width(mm)	min tilt angle(°)	flat bed in/out(mm)	Max carrying of flat bed(kg)	Qty.(pcs)	Rated of pulling for each one(KN)
5825+1350	249	25000	16000	6000	7550	2500	/	/	15000	1	40

Note: All ratings specified are based on structural factors of towing and lifting equipment only, not vehicle capacities or capabilities.

Wheel Base

Engine Power

Max Towing

Under Lifting System

Flat Bed

Winch

Notice

(mm)

(kM)

(kg)

Max Hoisting(kg)

Max Hoisting All Extended(kg)

Length(mm)

Width(mm)

Min Tilt Angle(°)

Flat Be d In/Out(mm)

Max Carrying Of Flat Bed(kg)

Qty.

Rated Of Pulling For Each One(kN)

P.S

3360

85

4495

/

/

4230+880

2280

7

/

1850

1

40

/

Wheel Base

Engine Power

Max Towing

Under Lifting System

Flat Bed

Winch

Notice

(mm)

(kM)

(kg)

Max Hoisting(kg)

Max Hoisting All Extended(kg)

Length(mm)

Width(mm)

Min Tilt Angle(°)

Flat Be d In/Out(mm)

Max Carrying Of Flat Bed(kg)

Qty.

Rated Of Pulling For Each One(kN)

P.S

3360

85/3200

4495

/

/

4230+880

2280

7

/

1850

1

40

/

There are five commonly used wrecker tow truck , usually depending on the type or size of the recovery wrecker :
First type : Boom towing truck

- use adjustable arms and winches to retract vehicles from ditches, embankments, or any vehicle that cannot arrive safely. Some booms are fixed, some heavy rotating racks, hydraulic telescopic tubes, others. In the past boom, trucks used the "hook chain" system, the chain around the frame or axle, and then hoisted by the winch. A heavy rubber pad is attached to the truck and truck so that it can be towed onto other bridges." Slings and belts are an evolution, replacing parts of chains with rubber belts.  slings did not use too much today because they could shave bumper cars. But they are sometimes used in wrecker accidents carrier or have one or two front wheels or rear wheels missing or pickups and other vehicles have steel bumpers. Equipped with all wheel drive, the truck is towed away, unable to use the machine string, because it can make the car power transmission system problems.

Second type :Wheel lift wrecker towing truck  

(also called "glasses") - from the chain hook technique to generate a large metal frame, can be installed in the front or rear under the cradle, rendering vehicles by pneumatic or hydraulic hoist can drag the ground clear front or rear. The device usually picks up the wheel of the vehicle (i.e., front wheel, if it is front wheel drive, rear wheel, if it is rear wheel drive), and contacts the tire.   wheel lift wrecker tow truck are common in china; cradles are like glasses. Medium and heavy-duty trucks use variations, "underlift" or "chassis lift", in which the elevator shaft or frame is not the wheel. A forklift truck can be used as an adapter or a lift chassis.

Third type :Integration towing truck  (also known as "Self Loader wrecker equipment", "Snatcher towing vehicle", "quick choice tow truck" or "roll back wrecker") - the arm and wheel lift together. Used of light trucks to recover or stop vehicles. Most of the truck's cab equipment is controlled so that the pickup truck does not leave the truck to connect the vehicle.  heavy trucks are also manufactured using integrated lifts.

Forth type --Flat plates wrecker truck  (also known as "rolling back tow truck" or "sliding tow truck") - the entire back of the truck is fitted with a bed that can be hydraulically tilted down to the ground, allowing the vehicle to be placed under its own power or pulled up by the winch. [9] because they carry, rather than traction vehicles, it can be completely fixed; in the United States, they carry serious damage to car accidents.

Fifth type ---Lifting platform  wrecker truck the derricks lift the vehicle vertically and use the wheel lift to load it on the bed. In Europe, this car can eliminate the parallel parking of vehicles.

 

 

Certifications

Packaging & Shipping

FAQ

1.Are you trading company or manufacturer ?

We are Group Corporation manufacturer ,have Group Factories Contractor.

2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.

3. What's the delivery time and can you lower the price?
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
 

4.Can you supply some quick-wear parts?

Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
 

6.Do you have any used products for sale?

We have products in stock for choices,the prices are favorable,we'll show you our stock products if you need.

7.What's the payment terms?

TT 30% as deposit, balance before shipment by TT or at sight.

8. How to guarantee customers get the goods smoothly after they payment?
Don't worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don't delivery products, the deposit will be returned to you.

9.How can you ensure the quality of the products?

Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.