Vehicle model	5310XXH6
Chassis type	HOWO
Engine power	327kw
Quality of service	30805kg
Gross mass	31000Kg
Overall dimension	11995×2550×3990mm
Pump flow	400-600m³/h (multiple portable submersible pumps are optional)
Suction range of pump	6-8.5 m
Pump head	10-25m
Generator power	50-90kw, 1200KW
Configuration requirements	Generator sets and pumps can be selected according to customer needs well-known brands

Overall dimensions:	11995×2550×3820,3890,3990(mm)	Fuel Type:	Diesel oil
Gross Weight	31000(Kg)
Net weight	30805,30870(Kg)	Rated load	(Kg)
Approach Angle/Departure Angle:	17/11(°)	Front/rear overhang:	1500/2570(mm)
Axle Load:	6500/7000/17500	Wheelbase:	1950+4625+1350,1950+4600+1400, 2150+4625+1350,2150+4600+1400(mm)
Axle Number	4	Maximum speed:	101(km/h)
Tire Number	12(PCS)	Tire Specifications:	11.00R20,12.00R20 18PR,12R22.5, 295/80R22.5,315/80R22.5 18PR
Fuel consumption:	(L/100Km)	Number of spring pieces:	11/11/12,4/4/12,11/11/-,4/4/-
Front wheel track:	2022/2022,2041/2041(mm)	Rear wheel track:	1500/2570(mm)

Generator	The motor adopts no brush bearing motor, the main controller of the unit is displayed in Chinese, and it shall have perfect protection function and communication interface. 1. Rated power: ≥1200KW, with constant load operation under a certain insulation level, it is allowed to overload for 1 hour every 12 hours, and the maximum power is allowed to overload by more than 10%; 2. Rated frequency: 50Hz; 3. Rated voltage: three-phase AC: 690V; 4, Excitation mode: brushless self-excitation; 5. Voltage regulation: automatic voltage regulation AVR; 6, phase number: three-phase four-wire system; 7. Protection level: IP 23; 8. Insulation level: Grade H insulation; 9. Waveform distortion rate: ≤4%; 10, short circuit current capacity: 300%, 10S; 11. Overspeed capacity: ≥2250rpm; 12. Provide 30KW / 400V voltage stabilizing power supply and power distribution cabinet for the use of winch and external equipment; 13. Telephone impact factor (TIF) is less than 50, and electromagnetic effect (THF) is less than 2%.
Generator Set Control System	1. The control screen must have the following operation function buttons: start, stop, manual mode, automatic mode, test mode, alarm silencing, five-key menu navigation button, emergency stop button, test light / reset button. The control system is required to have the function of parallel machine, which can realize grid connection with the existing generator set of the purchaser, and reserved parallel machine interface; 2. The control screen must have the following status indicator lights: shutdown state, manual mode state, automatic mode state, test mode state, normal power generation, power generation power supply state, normal city power, city power supply state, remote start signal, fault signal, high water temperature, low oil pressure, overspeed; 3, the control screen must display the following unit operating parameters: three-phase voltage, three-phase current, frequency, power factors, apparent power, active power, reactive power, power degree meter (Kwh, Kva. H, Kvarh), engine speed, oil pressure, cooling water temperature, battery voltage, operation hours, engine start times, oil temperature, charge air pressure; 4. The control screen must have the function of fault event logging and ≥100 event records for easy fault search and maintenance. 5. The unit controller must communicate with the control unit of the electric injection engine to display the start fault code information and the engine operation parameters; 6. The control screen has the functions of automatic start and shutdown, and has automatic and manual shutdown functions; including but not limited to the following alarm or shutdown functions: Generator voltage is too high, too low- - - -shutdown oil pressure is low- - - - - - -alarm Generator frequency is too high, too low- - - - - - - - - -the shutdown water temperature is high- - - - - - - - - - -alarm The oil pressure is too low- - - - - - - - - - -shutdown generator overload- - - - - -alarm Three start failure- - - - - - - - - - - -shutdown high battery voltage- - - - - - -alarm Overspeed- - - - - - - - - - - - - - - - - - - - - - -shutdown low battery voltage- - - - - - -alarm Water temperature too high- - - - - - - - - - - - - - -shutdown fuel oil level low- - - - - - -alarm 7, with the function of oil machine start delay time adjustable, 0~60 seconds; 8, with the function of oil machine shutdown delay time adjustable, 0~60 seconds; 9, LCD LCD display, pixel ≥132X64, support multi-language display; 10. Protection grade ≥IP65; 11. It can be connected to the computer through USB interface to facilitate parameter setting; 12. After installing the expansion module, it can remotely start, stop and monitor through the APP program; 13. With the function of grid connection, install the data interface, and be compatible with the existing equipment of the purchaser when the controller is connected to the grid.
Generator Set Output Switch Cabinet	Electric operation (can be used), one with a standby. The maximum current of circuit breaker ≥2000 and the setting current of circuit breaker ≥1600.
Technical Requirements For Daily Fuel Tank	1. The daily fuel tank for at least 8 hours; 2. Material of fuel tank: carbon steel, steel plate thickness not less than 3mm; 3. The oil tank shall be treated with corrosion and rust, with at least one primer and two topcoats, and the paint color shall be determined by the bidder; 4. The fuel tank should be equipped with an access port, and the access port should have a dust cover plate; 5. The fuel tank should have a liquid level indicator and an indicator to close the valve; 6. The oil tank shall be equipped with a level gauge for automatic refueling system. The level meter shall use passive contact, and the level meter shall include low, high and super high oil levels. The level meter shall be easy to assemble; 7. Fuel tank accessories: fire resistance respirator, a full set of valves, connecting flanges (one set for each connecting port), connecting bolts. Note: Valve and flange size shall be determined by the bidder according to the oil supply system of the whole generator set.
Technical Requirements For The Vehicle-Mounted System	Outside the carriage	1. Process: the appearance of the box body shall be flat, the width lamp shall be installed at the front corners of both sides of the roof, and waterproof and anti-seepage measures should be set at each door; the box body shall set or reserve corresponding doors or internal channels to facilitate the daily maintenance and operation of the unit; the corresponding shock absorption device between the box frame and the chassis; the daily operation of the generator set should be completed inside the box, and the service life of the box shall be more than 10 years; 2. It shall have the functions of fire prevention, flame retardant, rain prevention, snow prevention, dust prevention, rust prevention, heat insulation, noise reduction and shock insulation, long-term seismic structure, high outer strength, smooth surface treatment, reasonable vehicle configuration, lighting and fences; multi-stage noise reduction and environment-friendly noise reduction materials for long time.(Car body with high strength, light quality, small welding volume as the first choice); 3. Side doors and steps: The box body should be equipped with a side door and a convenient step to step up and down the car or small activity ladder, the step and straight ladder position should be arranged reasonably; 4. Emergency stop switch: the emergency stop switch should be set on the outside of the box, which is easy to shut down when the unit is abnormal; 5. Car structure of integrated steel structure design, material is not less than 2mm fine cold plate, the middle skeleton using rust-treated steel pipe welding, interior spray punching steel plate, the inside and outer layer filled with environmental protection flame retardant cotton, bus technology and high-grade paint; door body steel plate thickness is not less than 3mm, the box surface is smooth and smooth, surrounding edges and Angle. Each door opening of the box body should be set up with waterproof, anti-seepage measures; 6. Spray the surface of the carriage with poly paint (the specific color is engineering yellow), and spray the words "Urban drainage" in prominent positions on both sides of the carriage. The font and color are black, and the cost is included in the tender quotation; 7. The unit installation structure is reasonable and orderly; with seismic function, spacious space and convenient for maintenance and operation; 8. According to the carrying capacity of the vehicle, the vehicle chassis should be equipped with a hydraulic support system, and each support part of the support system should be able to be adjusted separately; 9. The operation panel is installed on the side of the car, and the operator is standing on the ground for convenient operation; 10. Rain-proof and dust-proof aluminum alloy blinds, equipped with a ladder for maintenance on the roof.
	Inside the carriage	1. The overall layout of modified vehicle equipment and equipment: in the overall layout of the power supply vehicle, the generator set should be protected by the engine in transportation and use, so as to reduce the failure of the engine, extend the service life of the unit, and have a reasonable space for unit maintenance. And leave a reasonable fuel tank, cable winch, basic daily maintenance operations and other operating space. The counterweight requirement of the whole vehicle is reasonable. With a reasonable inlet and exhaust air and smoke exhaust system. The power supply car is required to be used in all-weather conditions. The power loss of the generator set after the vehicle modification shall not exceed 5%. 2. Lighting equipment: explosion-proof fluorescent lamp and emergency lights shall be provided in the compartment; AC / DC lighting system and municipal power combined explosion-proof AC power outlet which meet the explosion-proof requirements. When the unit is not started, the DC lighting system is used. AC / DC lights installed inside the box for easy operation, AC / DC separation, control box with 80A circuit breaker; all wiring inside the box shall be flame retardant pipe (groove), and all cables shall be waterproof, oil resistant and flame retardant cables. 3. Fire fighting equipment: the structure of the muffler should avoid fire accumulation, and dry powder fire extinguishers should be equipped in the compartment and installed in a place easy to use. 4. Cable release device: electric / manual cable winch and accessories should be set inside the box body, a total of four sets, electric and locking function. Two of them can wrap 750 m load cables, Seven compartments, One set is installed in the power supply car, One set is provided to the purchaser and equipped with one 10 kW diesel generator set (see below) for winch power supply; The other two sets can wrap 4 load cables, Four compartments, Install the corresponding number of nylon universal wheels according to the maximum load weight of the winch, Provide to the purchaser to place matching cables, All winches shall be wrapped by the purchaser, Cable selection per unit cross-sectional area load capacity, high temperature resistance grade of flame retardant rubber sleeve flexible cable, And should adopt a single-phase split disk layout, If the single-phase current is relatively large, The form of single-phase multiple separation should be adopted, A, B and C, N item 2 root, Its cross-sectional area shall meet the requirements of the unit operation, Power supply car supporting cable for 14 cables, A single cable shall not be no less than 50 meters. 5. The connection between the output cable of the power car and the output end of the generator set is a quick connector. The quick connector shall meet the operation requirements of the unit and the technical conditions of the product, and shall be common with the quick connector originally purchased and installed by the purchaser. 6. The partition shall be laid on the ground with the lower edge of the unit base, and the partition shall be no less than 5mm thick aluminum plate with anti-skid pattern, closed cable running channel and closed in the partition layer. 7. All the electrical wiring in the carriage is reasonable and beautiful, and through the PVC flame retardant insulation pipe. 8. Car tank should be set inside, the tank should be equipped with 12V electric refueling device set, reserved for operation convenient daily refueling outlet and sewage outlet, box should set the corresponding compartment or take other measures to ensure that the unit operation, the tank capacity should meet the unit fully load for at least 8 hours and meet the relevant fire control requirements. 9. Technical requirements for diesel generator set (10kw) 1) Generator Phase number: three phase / single phase Rated output: not less than 10 kVA Maximum output: not less than 11 kVA Power factor: not less than COS φ 0.8 Rated voltage: 380V / 220V Rated current: not less than 15.2A Speed and frequency: 3000rpm (50Hz) DC output 2) Engine Engine type: four-stroke, three-cylinder diesel engine Displacement: not less than 719CC Rated power: not less than 11.5kw/3000rpm Start mode: electric start Tank capacity: not less than 32L Continuous working hours: not less than 8.8 hours Lubricating oil capacity: not more than 3.1 liters 3) Attached devices AC overload protection: fuse-free circuit breaker (NFB) Fuel meter: there is Voltage meter: have Operation Schedule: Yes Output indicator light: Yes Preheated indicator light: Yes Oil alarm lamp: Yes Water temperature alarm lamp: yes Battery charging indicator light: Yes 4) Other Size (length * width * height):≤1025×645×950mm (including wheels) Net weight:≤266kg (including wheels) Battery capacity: 12V-45 AH
	Other requirements	1. Low noise design, the allowable noise value of on-board generator shall comply with the provisions in the following table: Note 1: Noise value at 1m of the on-mounted generator Note 2: Noise value at 7m of the vehicle generator vehicle 2. Equipped with power generation room, inlet and exhaust air sound muffler room, double muffler, equipped with explosion-proof lights, working lights, double pipe pneumatic system, fire extinguisher, vehicle taillight components, internal in and out, tool kit. 3. Air inlet, exhaust outlet, filling outlet and sewage outlet, air inlet and exhaust outlet are not in the same direction, with insulation door and step ladder. The inside and outside of the generator set liquid (lubricating oil, fuel oil, antifreeze) and sewage outlet should be set for the daily maintenance of the unit. The sewage outlet should be set under the vehicle chassis or under the box.(Ensure at the lowest chassis) 4. Connect the dual exhaust smoke and noise elimination system, fuel system, charger, self-start signal line, lighting and other electrical systems. 5. Diesel generator set is directly grounded with neutral point; the equipment shall have good grounding device and be marked with specified symbols or figures. The vehicle shall be equipped with a grounding bar with a length of not less than 0.6m and a grounding wire of not less than 20m.(Ground wire with insulation sheath, the cross-sectional area is not less than 25mm²) 6. Equipped with a coolant heating system. 7. The main components of the invested diesel engine, generator and control system are compatible with the existing equipment of the purchaser.

Unit power P (Main)KW	Noise level dB (A)	Noise level dB (A)
P≤200	≤72	≤67
200	≤76	≤71
P>500	≤80	≤75

Product model	DRZ5155XDY
Chassis	Sino truck Howo Japan Brand I.SUZU
Overall dimensions L×W×H mm	9100x2550x3610, 3850
Displacement (L)	6.8
Fuel	Diesel
Wheelbase (mm)	5000
Diesel generators equipped (Kw)	80-300

After-sales Service:	24
Warranty:	24
Fuel:	Diesel

Payment Method:
	Initial Payment Full Payment

HOWO Truck Mounted Power Supply Truck with 1200kw Generator

Product Description

Company Info.

Basic Info.

Packaging & Delivery

Product Description

Send your message to this supplier

People who viewed this also viewed

Find Similar Products By Category

Hot Searches

You Might Also Like

Product Groups