Dfl Supersucker Combined Vacuum Jetting Tanker Trucks (9CBM Water tank and 11CBM Sewage tank Jet VAC Tanker)

• Customization: Available
• After-sales Service: 24
• Warranty: 24
• Model NO.: Combined Vacuum Jetting Tanker
• Emission Standard: Euro 3-5 -6 -7
• Payload: 30T
• Transmission Type: Manual
• Fuel: Diesel
• Tank Volume: 8, 000 Liters-12, 000liters
• Drive Wheel: 6x4
• Hoesrpower: 210-390HP
• Condition: New
• Drive Type: LHD/Rhd
• Dimension(L*W*H)(mm): 11870*2500*3990mm
• Tyre & Spare Tyre Spec: 11.00-20 18pr, 11.00r20 18pr, 12.00-20
• Gvw./Kerb Wt.: 36000/18005(Kg)
• Wheelbase (mm): 4400+1350mm
• Tank Material: Q235 Carbon Steel Optional Lined PE
• Clean Water Tank Capacity: 2000 Litres-10000 Litres
• Sewer Water Tank Capacity: 18000 Litres -30000L
• High Pressure Pump: Optional 16MPa, 18MPa
• Vacuum Pump: Optional Water Ring Pump
• Transport Package: Nil
• Specification: Vac Tanker
• Trademark: Dong Run Ze
• Origin: China
• HS Code: 8705999090
• Production Capacity: 80000

Product Description

 DFL SUPERSUCKER Combined Vacuum Jetting Tanker Trucks (9CBM Water tank and 11CBM Sewage tank Jet Vac Tanker)

 25Ton-30Ton Vacuum Sewer Sewage Cleaning Truck (Sewer Septic Tank High Pressure Combined Water Jetting Truck )
High Pressure Combined Vacuum Sewage Sewer Water Jetting Truck

30Ton Vacuum Sewer Sewage Cleaning Truck (Sewer Septic Tank High Pressure Combined Water Jetting Truck 18m3 Wast Sludge 10m3 Clean Water Tank ) 
Cesspit Emptier  Vacuum Tanker Truck  






 For Cesspool Emptier  
DFH1310A1
carbon - stainless steel

Vac truck with 20000 -25000 l. capacity on  truck chassis. The vacuum tank is manufactured of 5mm - 6 mm thick steel sheets. The dished bulkheads on both sides are always fabricated with 6 mm steel. The appropriate number of of inside baffles are made of 5 mm steel sheets. Of course the complete tank is hot-dip galvanized in-and outside.

Special custom-made Vacuum Tank superstructure with Telescopic Tipping Cylinder (HYVA® tipping cylinders, Germany). Including Pneumatic Interlock System for additional safety.
Tipping cylinders are not required for normal suction jobs but rather for very special applications.

Full rear opening of the vacuum tank made of 6mm dished plate, hinged at the top and hydraulically operated. The debris tank door is securely fastened by hydraulic door locks or manually operated tightening bolts to secure the rear opening absolutely tight and pressure and vacuum proofed. The hydraulic rear door is fitted with an acid resistant sealing gasket. The debris tank body is made of European high-grade steel (thickness 4-5 mm) and electrically welded throughout. The vacuum tank can be provided hot dip galvanized in and out-side or inside painted with bitumen paint. Each vacuum tank will be supplied with an appropriate nos. of baffles of 5 mm thickness.

Instead of complete rear opening (hydraulically operated) of the vacuum tank you can just require a manhole with diameter of 600 mm. That solution is for "normal suction jobs" sufficient and will reduce the asset cost.


High-pressure flushing system with an effective high-pressure pump JUROP®, hydraulically driven by the PTO of truck. Our hydraulic system is including oil-cooler and fan. The hose reel is operated hydraulically. The 100 m. long high-pressure flushing hose DN 25 (yellow) is pushed into the dirty pipeline and with changeable nozzles (180 bar water pressure and 250 ltr. water per minute) all the debris such as stones, bottles, grease, sludge, grime etc. lodged in the pipe, will be flushed out. Our effective air vacuuming system sucks all the dislodged debris and forces it into the vacuum tank, finally the blocked sewer will be opened and effective cleaned in short time.
For high pressure cleaning tasks:
Hose-reel, located at the rear end of truck chassis, left- or right-hand side.
- Manual turning and hose guiding
- 40 m high pressure hose DN13 (1/2 inch). Operating pressure of 150 bar
- One (1) standard cleaning nozzle ½"
- 10m HD hose DN13 with high-pressure cleaning nozzle for general cleaning 

Vacuum-Jetting-Flushing combination truck for vacuuming and transport of oil mud, waste-water (sewage) as well as for high-pressure sewer pipe cleaning operations. The tank capacity is 15 000-19000 ltr. vacuum tank and 3 000-10000 ltr. integrated fresh water tank. The complete unit is mounted on 6x4 or 6x6 all-terrain truck chassis. The RAC-Germany® vacuum and high pressure combination truck may also be used for street flushing and many different cleaning jobs with the additionally provided high pressure water handgun (hose length 40 m, DN 13). That hose reel installed on the opposite site of the truck.

Vacuum-Jetting-Tank truck with high pressure water pump, hydraulically driven by the PTO of the truck (capacity approx. 50 ltr. / min at 150 bar) and manual hose-reel with 40 m DN13, 1/2" high pressure hose, mounted at the rear right side of the truck. The tank superstructure is built up on  truck chassis  (6x4 -6x6 - 8x4).
On the right side of the truck you can identify (on the above picture) the hydraulic system, consist of:
- Oil-tank with oil-cooler and fan
- Hydraulic pump
- Return filter 
- Control valves with integrated pressure relief valves

The rear end of the Vacuum-Jetting Tank superstructure can be furnished either with a 600 mm man hole or with complete rear opening, hydraulically operated, as shown on the above picture. However the Off-Loading Process of the tank content is always by pressure. The man hole as well as complete rear opening are only for (special) cleaning jobs. The tank needs not to be opened for loading or off-loading jobs.
 

Custom-made Vacuum-Jetting-Flushing-Tank-Truck

For the transport and suction of oil, mud, waste-water (sewage) and for high-pressure cleaning.

Volume: approx. 20 000 ltr. (11.000 + 9.000)
 

Tank Body

Tank shape	Cylindrical
Capacity	20 000 ltr.
Tank compartments	Two (2) 11000 -19 000 ltr for Sewage / Oil / Mud / Sludge 1 000-9000 ltr for fresh water

Tank body completely hot-galvanised in and out-side

Vacuum Tank with vacuum system

Full rear opening
Hydraulic operated rear opening made of 6mm dished plate and fitted with acid resistant sealing gasket.
Manual operated tightening bolts to secure the rear opening absolutely tight and pressure/vacuum proofed.
The rear opening is supported by heavy-duty hinges and to be opened hydraulically by manual operated pump with double acting hydraulic cylinders. A beaver tail is mounted for a smooth discharge after opening. At the lowest part of the rear dish-end, two (2) flanges mounted.

One flange 4" for suction and one flange 4" for pressure

Fresh-water-tank with Jetting System

Water tank
1 000 -9000ltr. water-tank integrated in main-tank, completed hot-deep galvanised
Upper man-hole cover DN550 with ventilation valve,
Side-filling via   coupling
Side discharge pipe 2"
Level indicator with colour ball for measure the water level, mounted on the right-hand side
Access ladder with walkway

High pressure system
One (1) high-pressure pump, hydraulically driven by PTO of truck chassis. Hydraulic system with oil-cooler and fan.
Capacity, approx.: approx. 50ltr. / min at 150bar

All vacuum tank trucks and vacuum-jetting-flushing tank trucks are custom-made in accordance with your specific requirements.

Sludge and Water Tank

 

Shape	Cylindrical shaped tank with external reinforce rings
Material	Mild steel
Primary shut off	SS float ball prevents overfilling sludge tank.
Shell thickness	5mm,6mm
Tipping cylinder	Front tipping and double acting cylinder
Safety support	Support the tank to ensure safety when it's tipped up
Sight glasses	3units are mounted at the rear of the tank
Over pressure safety	Over pressure relief valve on tank top
Full opening rear lid	Hydraulically opening and locking
Inlet and Outlet Valve	Pneumatically and Manual operation

 

 

Vacuum system

 

Vacuum pump	Liquid ring vacuum pump
Max vacuum level	95%
Continuous vacuum level	80%
Rotate speed	Max 900r/min
Pump cooling	Cooling Water tank 1,000L, mounted behind cab
Protection	1.Aluminum filter 2. Vacuum pressure relief valve
Telescopic suction boom	Stainless steel material. Swivel in both vertical and horizontal plane. 270°horizontal rotation, 6m working radius, 6m below ground and 1.4m extension..

 

High Pressure Combined Vacuum Sewage Sewer Water Jetting Truck

 

Reverse discharge system

Pressure switch system allows reverse discharging filtered water via suction boom or outlet valve, with only mud or solid waste left in tank. This reduces cycle dumping time, no need to go and back many times.

 

DFH1310A1 Chassis

Technical specifications

#	Engine model	Engine displacement	Engine power	Engine manufacturer
1	ISL9.5-292E51A	9460 cc	9.5 L	577 cuin	215 kW	292 hp	Dongfeng Cummins Engine Co., Ltd.
2	ISL9.5-315E51A	9460 cc	9.5 L	577 cuin	232 kW	315 hp	Dongfeng Cummins Engine Co., Ltd.
3	ISL9.5-340E51A	9460 cc	9.5 L	577 cuin	251 kW	341 hp	Dongfeng Cummins Engine Co., Ltd.
4	ISL9.5-360E51A	9460 cc	9.5 L	577 cuin	268 kW	364 hp	Dongfeng Cummins Engine Co., Ltd.
5	dCi350-51	11120 cc	11.1 L	679 cuin	257 kW	349 hp	Dongfeng Commercial Vehicle Co., Ltd.
6	dCi385-51	11120 cc	11.1 L	679 cuin	283 kW	385 hp	Dongfeng Commercial Vehicle Co., Ltd.
7	dCi420-51	11120 cc	11.1 L	679 cuin	309 kW	420 hp	Dongfeng Commercial Vehicle Co., Ltd.
8	DDi75S315-50	7530 cc	7.5 L	460 cuin	232 kW	315 hp	Dongfeng Commercial Vehicle Co., Ltd.
9	DDi75S350-50	7530 cc	7.5 L	460 cuin	257 kW	349 hp	Dongfeng Commercial Vehicle Co., Ltd.

Performance
Fuel	diesel fuel
Environmental standard	GB17691-2005 National V / Euro 5, GB3847-2005
Maximum speed	90 km/h		56 mph
ABS	have

Capacity
Rated load capacity	18170 kg, 18105 kg	18.2 t, 18.1 t		40,058 lbs, 39,915 lbs
Quasi-total mass of trailer	18000 kg	18 t		40,000 lbs
Load factor (the ratio of the payload of a vehicle to its weight)	1.44

Weights and Ground pressure
Curb weight	12700 kg	12.7 t		28,000 lbs
Gross vehicle weight rating	31000 kg	31 t		68,000 lbs
Axle load distribution	6500 kg / 6500 kg / 18000 kg () 6.5 t / 6.5 t / 18 t () 14,300 lbs / 14,300 lbs / 40,000 lbs ()

Dimensions
Overall length	11980 mm		39′4″
Overall width	2500 mm / 2550 mm		8′3″ / 8′5″
Overall height	3200 mm / 3870 mm		10′6″ / 12′9″

Cargo body
Cargo body length	9400 mm / 9600 mm		30′11″ / 31′6″
Cargo body width	600 mm / 800 mm		2′0″ / 2′8″
Cargo body height	2300 mm / 2400 mm / 2450 mm		7′7″ / 7′11″ / 8′1″

Undercarriage and Suspension
Number of axles	4
Wheelbase	1850+4600+1350 mm, 1850+4600+1400 mm, 2050+4400+1350 mm, 2050+4400+1400 mm		6′1″+15′2″+4′6″, 6′1″+15′2″+4′8″, 6′9″+14′6″+4′6″, 6′9″+14′6″+4′8″
Front track	2040 mm / 2040 mm		6′9″ / 6′9″
Rear track	1860 mm / 1860 mm		6′2″ / 6′2″
Front/rear overhang	1500 mm / 2680 mm, 1500 mm / 2630 mm		5′0″ / 8′10″, 5′0″ / 8′8″
Angle of approach	22°
Angle of departure	9°
Leaf springs	9 / 9 / 10, 8 / 8 / 10, 3 / 3 / 4, 9 / 9 / -, 3 / 3 / -

Tyres and Wheels
Number of tyres	12
Tyres dimension	11.00-20, 11.00R20, 295/80R22.5, 12R22.5

Miscellaneous
Seating capacity	2, 3
Steering control	steering wheel30Ton Vacuum Sewer Sewage Cleaning Truck (Sewer Septic Tank High Pressure Combined Water Jetting Truck )

25Ton Vacuum Sewer Sewage Cleaning Truck (Sewer Septic Tank High Pressure Combined Water Jetting Truck ) Main technical parameters of   DRZ5258GQWES cleaning and suction truck
Product Name:	Cleaning and suction truck	Appearance size:	945010050 x 2500 x 36503800 (mm)
Chassis type:	EQ1258GSZ5DJ	Cargo size:	X (mm)
Total quality:	25000 (Kg)	Approach / departure angle:	29/12 (degree)
Rated quality:	10805 (Kg)	Suspension ahead:	1515/31501250/34151450/3215 (mm)
Preparation quality:	14000 (Kg)	Maximum speed:	90 (km/h)
Engine	Engine manufacturing enterprise	Displacement (ML)	Power (kw)
ISD21050 YC6JA240-50 ISB21050 YC6A240-50 YC6A270-50 WP7.270E51 ISD24550	Dongfeng Cummins Engine Co., Ltd. Guangxi Yuchai Machinery Limited by Share Ltd Dongfeng Cummins Engine Co., Ltd. Guangxi Yuchai Machinery Limited by Share Ltd Guangxi Yuchai Machinery Limited by Share Ltd Weichai power company limited Dongfeng Cummins Engine Co., Ltd.	6700 6870 5900 7520 7520 7470 6700	155/211 177/241 155/211 177/241 199/271 199/271 180/245
Emission standards:	GB17691-2005 country V, GB3847-2005
Axle number:	Three	Front tread:	(mm)
Wheelbase:	4350+1300 4750+1300 5900+1300 4900+1300 5350+1300 4350+1350 4750+1350 5900+1350 4900+1350 5350+1350	Rear wheelbase:	(mm)
Tires:		Tire specifications:
Fuel types:	diesel oil	Spring number:
Axle load:	7000/18000 (two axis group)	Number of cab drivers:	Three
Vehicle notes:	1. The purpose of the vehicle is to clean and absorb pollutants. The main equipment is vacuum pump and tank. The tank size is (straight section length * diameter) (mm): 5400 * 2100, of which the tank front is clear water tank (straight section 1965mm), the rear end is the sewage tank (straight length 3435mm). The two cans are independent and cannot be fully loaded at the same time. When cleaning function, use clean water tank and use sewage tank when absorbing sewage function. The effective volume of the sewage tank is 13.6 cubic meters, medium: liquid dirt, density: 800 kg / cubic meter; the effective volume of the water tank is 10.08 cubic meters, medium: water, density: 1000 kg / cubic meter, 2, only using wheelbase (mm): 4350+13004750+1300. The corresponding relationship between length / wheelbase / front suspension / rear suspension is (mm): 9450/4350+1300/1515/22859450/4350+1300/1250/25509450/4350+1300/1450/235010050/4750+1300/1515/248510050/4750+1300/1250/275010050/4750+1300/1450/2550. The side / rear protective material is Q235, the side bolt is connected, the rear welding is welded, the section size is 300 * 50mm, and the lower edge is 500mm from the ground. Select the tank top guardrail style - install side suction pipe - choose the rear opening hydraulic opening mode - select the rear valve - select the rear cleaning tube reel style; 3, with the chassis optional cab; install the satellite positioning function of the driving recorder; ABS manufacturer: East Kokno commercial vehicle braking system (Shiyan) Co., Ltd.; model: 3631010-C2000.

30Ton Vacuum Sewer Sewage Cleaning Truck (Sewer Septic Tank High Pressure Combined Water Jetting Truck )

Main technical parameters of  DRZ5311GQWDV cleaning and suction truck
Product Name:	Cleaning and suction truck	Appearance size:	11980 x 2550 x 3850 (mm)
Chassis type:	DFH1310A1	Cargo size:	X (mm)
Total quality:	31000 (Kg)	Approach / departure angle:	22/11 (degree)
Rated quality:	1387513810 (Kg)	Suspension ahead:	1500/23001500/23601500/2410 (mm)
Preparation quality:	16995 (Kg)	Maximum speed:	90 (km/h)
Engine	Engine manufacturing enterprise	Displacement (ML)	Power (kw)
DCi350-51 DCi385-51 DCi420-51 DDi75S315-50 DDi75S350-50 DCi450-51 DCi465-51	Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Commercial Vehicle Co., Ltd. Dongfeng Commercial Vehicle Co., Ltd. Dongfeng Commercial Vehicle Co., Ltd. Dongfeng Commercial Vehicle Co., Ltd.	9460 9460 9460 11120 11120 11120 7530	232/316 251/342 268/365 257/350 283/385 309/421 232/316
Emission standards:	GB17691-2005 country V, GB3847-2005
Axle number:	Four	Front tread:	(mm)
Wheelbase:	1850+4600+1350 1850+4600+1400 2050+4400+1350 2050+4400+1400 1850+4100+1350 1995+4600+1350	Rear wheelbase:	(mm)
Tires:		Tire specifications:
Fuel types:	diesel oil	Spring number:
Axle load:	6500/6500/18000 (two axis group)	Number of cab drivers:	2,3
Vehicle notes:	1. The purpose of the vehicle is to clean and absorb pollutants. The main equipment is vacuum pump and tank. The size of the tank is straight section length * diameter (mm): 7100 * 2350, of which the tank front is clear water tank (the outer dimension is 2600mm), and the rear end is the sewage tank (the outer dimension is 4500mm). The two cans are independent and cannot be fully loaded at the same time. When cleaning function, use clean water tank and use sewage tank when absorbing sewage function. The effective volume of the sewage tank is 18 cubic meters, medium: liquid dirt, density: 800 kg / cubic meter; the effective volume of the water tank is 10 cubic meters, medium: water, density: 1000 kg / cubic meter, 2, wheelbase / rear suspension corresponding to (mm): 1850+4600+1350/26801850+4600+1400/ 26302050+4400+1350/26802050+4400+1400/2630. Optional rear valve; optional rear reel - pick up the aisle and guardrail on the top of the tank; the side / rear protective material is Q235, the side bolts are connected, the rear welding is welded, the section size is 300 50mm, the lower edge is 500mm from the ground. 3, with the chassis optional cab; install satellite positioning function of the travel recorder; ABS model / manufacturer: 3631010-C2000/ East knkner commercial vehicle braking system (Shiyan) Co., Ltd.

 

Certifications

Packaging & Shipping

FAQ

1.Are you trading company or manufacturer ?

We are Group Corporation manufacturer ,have Group Factories Contractor.

2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.

3. What's the delivery time and can you lower the price?
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
 

4.Can you supply some quick-wear parts?

Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
 

6.Do you have any used products for sale?

We have products in stock for choices,the prices are favorable,we'll show you our stock products if you need.

7.What's the payment terms?

TT 30% as deposit, balance before shipment by TT or at sight.

8. How to guarantee customers get the goods smoothly after they payment?
Don't worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don't delivery products, the deposit will be returned to you.

9.How can you ensure the quality of the products?

Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.