15/20/25/30 Ton Mixing and Charging Emulsion Bulk Anfo Trucks Mobile Explosives Manufacturing Unit Congo Drc Peru Ghana Zimbabwe Mining Blasting

Product Description

15/20/25/30 Ton Mixing And Charging Emulsion Bulk ANFO Trucks Mobile Explosives Manufacturing Unit CONGO DRC PERU GHANA ZIMBABWE Mining Blasting

20T Sinotruk 8x4 Explosives Transport ANFO Ammonium Nitrate Explosives Truck MMU MEMU

On-Site Mixing And Charging Machine Granular Ammonium Explosive ANFO Truck
MEMU MMU Anfo Explosives Units

 

Customize BCRH -20 Explosive Mixing & Charging ANFO Auger Truck 

 

Effective volume of latex base matrix box: 16.5m3

Filling efficiency: 200-280kg/min2" pipe conveying/length 30m)

Effective volume of trace element box A: 0.12m3

Effective volume of trace element box B: 0.12m3

Metering error: ≤±2%

Function:

BCRH-20 on-site mixed emulsion explosive vehicle is contained in each bin: water phase, oil phase, sensitizer and latex matrix in the car, that is, emulsification, sensitization and filling are carried out on the vehicle. It is a combination of transportation, mixing and filling, and is suitable for the operation of water-containing blastholes in open pit mines. The advanced computer operating system, the flow of the aqueous phase and the speed of the emulsifier adopt automatic tracking and closed-loop control, stable performance, accurate ratio, safe and reliable. It has a safety guarantee system for over-temperature, over-pressure, and material-break alarm shutdown.

 

Description:

• Before charging, at ground station, relevant materials should be added into corresponding container in the truck.

• When loading truck comes to job site, start PTO, stretch charging tube into bottom of the hole, input explosive load on counter and press start button. Then, each preparation and mixing unit begins to work. Slowly raise charging tube. Explosive is charged below water, and water is discharged from hole. After charging, move to the next hole, repeat the above procedure, and charge the next hole.
• Charging effectiveness 200-280kg/min.

• Currently, there are 5 specifications, 8T, 12T, 15T, 20T, 25T.
• Measurement error ≤ ± 2%

Emulsified explosive truck with on-site mixing loading of NCHR line can mix pure emulsion explosives and series emulsion explosive with 30% of dry mix at most on-site. The preparation of aqueous phase, oil phase and sensitizer is operated on ground station, while latex matrix emulsion can be completed on the ground, or in truck. Dry material mixture and sensitization is conducted in truck.

ANFO mixing loading truck list of main equipment

equipment

 

Item	Name	QT.	Remarks
1	Vehicle chassis	1	HOWO truck chassis
2	Material storage tank,Ammonium nitrate box:12-18m3, Fuel tank:1-2 m3		The volume size can be designed according to user requirements 304 stainless steel
3	Screw conveyor	3 bar	304 stainless steel
4	Hydraulic pressure system	1 set	Engine power,hydraulic oil pump,hydraulic oil container,radiator,hydraulic motor,solenoid valve group and so on
5	Automatic control system	1 set	sensor,computer,control software,safety interlock system and so on

 

Main technical parameters of ANFO Truck

Chassis model	HOWO 8x4 truck chassis
Probable outline dimension (mm)	11000x2500x3400
Chassis Number	ZZ1317N4667W
Max.speed(km/h)	80
Power Source	Automobile engine
Porous ammonium nitrate box m3	20
Diesel feed box m3	1
Hydraulic oil tank m3	0.5
Charge rate kg/min	≥200
measurement error	±2%
Filled aperture mm	≥Φ90
Safety precautions	Over temperature protection, disconnection, chain startup and stop

 

HOWO 8x4 truck chassis information

General information
Driving Type	8X4
Wheelbase	1800+3775+1400; 1800+4275+1400; 1800+4575+1400; 1950+3800+1400; 1950+4600+1400; 1800+3200+1400; 1950+4300+1400; 2100+3500+1400; 2300+3500+1400 mm
Overall length	11.00-12 m
Overall width	2.496-2.55 m
Overall height	3.50 -3.99 m
Front/ rear tread	2020/1830mm
Curb weight	14-16.00T
Total mass	31.00-38T
Approach angle/ Departure angle	15/25
Suspension form	10/9+6
Engine information
Engine model	WP.MC
No. of cylinders	6
Fuel type	Diesel
Cylinder arrangement	In-line
Displacement	9.726L
Emission standard	Euro III
Max. torque speed	1200~1500RPM
Rated revolution	1900RPM
Cabin information
Person	2
Rows of seats	1
Gearbox information
Gearbox type	HOWO gearbox
Shift mode	Manual
Forward gear	10
Reverse gear number	2
Tyre
No.of tyre	12+1
Tyre model	12.00-20

 

 

ANFO / Explosive Delivery Trucks 

20T BCRH-20 SHACMAN X3000 On-site Mining Blasting Bulk Mixed And Charging Emulsion Explosives ANFO Truck MEMU MMU  

Dong Runze Special Vehicle	BCLH-15 /20/30 ANFO Truck	BCRH-15 /20/30 Emulsion Re-pump Truck	BCZH 15 /20/30Quad Mixing/Loading Truck
Dimension(mm)	11700/12000×2500×3895mm	11700/12000×2500×3895mm	11850/12000×2550×3999/4400mm
Automotive chassis	BEIBEN (North-Benz)/Shananxi SHACMAN / Sinotruck HOWO/DFAC/FAW	BEIBEN (North-Benz)/Shananxi SHACMAN / Sinotruck HOWO/DFAC/FAW/	BEIBEN (North-Benz)/Shananxi SHACMAN / Sinotruck HOWO/DFAC/FAW/     SX1316DR366
Max. speed	90km/h	90km/h	90km/h
Max.load	15T/20T/30T	15T/20T/30T	15T/20T/30T
Charging quantity	15000kg/20000kg/30000kg	15000kg/20000kg/30000kg	15000kg/20000kg/30000kg
Charging speed	Standard 200-450kg/min Maximum 1000kg/min	120~280kg/min	Standard 200~630kg/min Maximum 1000kg/min
Filling bore diameter	≥φ90mm	≥φ40mm	≥φ32mm
Hose specification		One hose each for 1"and 2"	One hose each for 1"and 2"
Hose length		40m	40m

Series Classification

1. BCLH Series: On-site Mixed ANFO Explosive Truck

2. BCRH / BCZH Series: On-site Mixed Emulsion Explosive Truck

 

Heavy ANFO Explosive Mixing And Charging Truck with Multiple Mix Units for  Mining Blast

   We supply a mobile manufacturing unit (MMU) which can be engineered for customers with small or large operations.  Our multiple mixing units  is capable of augering ANFO and Heavy ANFO and pumping blended product in blast holes at surface mining operations.  Not all mining operations are huge, and when the market demanded a cost effective solution for smaller operations, a mobile unit seemed an obvious choice. 

   Field mixing and Charging heavy ANFO truck is also known as multi-functional  On-site mixed explosive loading truck, which is the combination of two kinds of vehicle functions: field mixing emulsion explosive truck and field mixing charging porous granular ANFO truck, and the functions are greatly increased after combination.   Pure emulsion explosive, porous granular ANFO explosive, heavy emulsion explosive and heavy ANFO explosive can be mixed on site.   And the ratio of emulsion explosive and porous granular ANFO explosive can be adjusted at will between 100:0 and 0:100.   The emulsion explosive is mainly (greater than or equal to 50%), and the porous granular ANFO explosive is supplemented (less than or equal to 50%).   This explosive is called heavy emulsion explosive, and the common ratio is 7:3, which is suitable for water cannon holes with hard rock hardness.   The porous granular ANFO explosive is mainly (greater than equal 50%), and the emulsified explosive is secondary (less than or equal to 50%), this explosive is called heavy ANFO explosive, and the common ratio is 5:5, this explosive is used for waterless cannon holes with hard rock hardness.   This kind of in-situ mixed explosive truck is suitable for both water hole and dry hole, and can meet various blasting projects

BCZH quad multi-functional Explosive Mixing And Charging truck utilizes load-sensing proportional hydraulics and a closed loop control system to efficiently and accurately control the mixing ratio of ANFO, emulsion, and chemical gassing agents. The quad vehicle is capable of pumping or augering a full range of bulk products: 100% bulk emulsion, various heavy ANFO blends and100% ANFO. The control system is fully automated and feature on-board data logging and diagnostics. The unit utilizes a configurable static mixer column and water ring lubrication system to reduce pumping pressure through the length of the hose.

 

to delivering explosives to an opencast surface mine, a mobile solution works best.  What the industry needed was a way to take different explosive products directly to the bench in an active mine and to be able to prepare the explosives compound on site.  The structure would be mounted on the rear chassis of a customised truck and therefore allow for full mobility.  Contact us for more information on our reliable and durable equipment.

 

Our multiple mixing units have the ability to manufacture ANFO and Heavy ANFO to auger or pump a blended product into blast holes.  Bins are generally permanently fixed to the chassis.  These units consist of an ammonium nitrate storage bin, emulsion storage tank, fuel oil tank, water tank, hose reel and optional product additions tanks.

The product is discharged using a side-mounted discharge auger, or pumped into a wet blast hole using a loading hose.  Emulsion is generally added to the ANFO in the discharge auger.  A helical rotor pump is used to transfer the product during the wet hole loading process.

 

Hose reels can be manufactured to suit the various discharge rates and hose diameters as required.  These reels are usually driven using a reduction gearbox.  These reels are driven using a reduction gearbox to give optimum control of the hose feed rate in the hole.

To achieve a waterproof product, at least 50% emulsion will need to be added.  However, to obtain a product that can be reliably pumped, you will need to use waterproof heavy ANFO with between 60-70% emulsion.  Heavy ANFO is pumped through a hose, with the hose retracting as loading proceeds.

 

BCRH-15 Emulsion truck utilizes load-sensing proportional hydraulics and a closed loop control system to efficiently and accurately control the ratio of the pumped emulsion and chemical gassing agents. Emulsion is pumped through a progressive cavity pump, while high pressure piston pumps supply gassing agent and water flow. Emulsion hauling capacity is 15MT, and the delivery rate can be varied from 100-300kg/min. The control system is fully automated and features on-board data logging and diagnostics. The emulsion re-pump truck utilizes a configurable static mixer column and water ring lubrication system to reduce pumping pressure through the length of the hose.

 

BCLH-15 ANFO truck utilizes load-sensing proportional hydraulics and a closed loop control system to efficiently and accurately control the mixing and loading of ANFO. The control system delivers automation, wireless remote control, on-board data logging and diagnostics. The body is available with either an overhead or side boom auger configuration. ANFO hauling capacity is 15MT, and the ANFO discharge rate can be varied from 100-1000kg/min. The ANFO unit utilizes proportional computer-control and well-designed diesel fuel injection to increase the wetted surface area of AN prill for maximum fuel distribution and absorption.

 Keywords: MEMU, ANFO Charger Truck, Mining and Tunneling Utility, anfo-mix-units, ANFO Explosive, ANFO Mix Units,Anfo Mix Modules, ANFO Explosive Delivery Truck for Mining, ANFO Explosive Delivery Truck for Mining Operations, ANFO & Emulsion truck, explosives equipment manufacturers, Process Plants, manufacture ANFO, ANFO Mix Units, Heavy ANFO Units, SINOTRUK HOWO 8X4 Field Mixed Loading ANFO, 15T Mining Blasting Equipment,Explosive ANFO,mulsion and ANFO Trucks, Emulsion & ANFO truck, SINOTRUK HOWO 8X4 Field Mixed Loading ANFO Explosive Truck, Mining Explosives Equipment, Powder Monkey AN-FO Loader, ANFO Bulk Truck, Underground Anfo Loader Utility Vehicle, Mining Charger Truck for Mines, heavy ANFO units, blend ANFO and emulsion, anfo trucks for sale, anfo explosive oil, underground anfo charger truck, ANFO Truck 5 Ton, ANFO (Ammonium Nitrate Fuel Oil) recipe Vehicle, Explosives Emulsion Truck for sale, ANFOex Truck, Matrix emulsio MMu, emulsion type explosives trucks,Heavy ANFO Manufacture , Anfo Loader , Anfo Loader Carrier Utility Vehicles, Mining Vehicles, China Anfo Loader Truck, Anfo Delivery Truck, on Site Mixed Anfo, Bulk Explosives Trucks, charger truck, Anfo Charging Equipment, vehicles for ANFO charging, Nitrate Mobile Manufacturing Unit, multiple mix units,AN/FO bulk truck, specialized vehicle,Heavy AN/FO Trucks, Bulk AN/FO Truck Manufacturer, MEMU trucks, ANFO bulk explosives truck, ANFO bulk truck,Anfo Loader Tanks, Anfo Mixer Truck, Explosive Carriers,underground blasting operations,explosive units, Anfo Mixers, Anfo Truk, 15T Heavy Emulsion ANFO Explosives Truck, Explosives transport and loading ANFO vehicle, Mix Pump Units

mixed explosives vehicle ,ANFO / Explosive Delivery Trucks ANFO mix unitsANFO Explosive Delivery Truck for Onsite Mixing and Loading

ANFO charging truck has a simple structure and it is easy to control. The maintenance cost is low and the production procedure is simple, so the BCJ series ANFO charging truck is mainly used in low hardness rock blasting operations or when the blast hole is in the open air and there is no water.Dongfeng KC 25-30m³ 8x4 Bulk Explosives Transport Truck / ANFO Truck / Emulsion Explosives Truck for Mining

kg/min Charge speed	200~400 kg/min
Maximum loading dose	15t
Charge type	ANFO explosives
Charge transfer mode	Screw Conveyor
Charge distance	5m

 

 

Main technical parameters  

 

 

 

 

 

 

ANFO mix units

Bulk Explosives Loading Trucks

MIXING CHARGE MACHINE
Effective volume of emulsion matrix material box
(1) 5.4m3, 7T
(2) 4.8 m3 loading 6.5T
Effective volume of dry material box 7.9m3 loading 6.5T
Effective volume of fuel tank 1.2m3 loading 1T
Microelement box (1) effective volume 0.12m3 loading 0.12T
(2) Effective volume 0.12M loading 0.12T
Charge efficiency charge water hole 100-200kg / min charge dry hole 300-450kg / min
Measurement error ± 2%
Overall dimension: length × width × height (11500mm × 2560mm × 3620mm)
Dry charge machine
Overall dimension of the whole vehicle: 9930 × 2500 × 3680
Driving mode: 8 × 4
Speed limiter: 79km / h
Rated drug loading: 15000kg
Charging efficiency: 450kg / min
Measurement error: ≤ 2%
Loading capacity of dry material box: the material box is divided into four silos, with an effective volume of 17.5m3, which can be filled with 15 tons of porous granular ammonium nitrate. When charging on site, two-way blast hole charging is realized.
1 × Bin: 3750kg ammonium nitrate
2 × Bin: 3750kg ammonium nitrate
3 × Bin: 3750kg ammonium nitrate
4 × Bin: 3750kg ammonium nitrate
Diesel tank load: 1000kg 
 

BCLH-15G Field mixed loading granular ammonium frying truck

On site mixing of granular ammonium frying vehicle ( BCLH Series of products can be mixed with porous granular ANFO in the field. It is mainly used for dry hole loading explosives in open-pit mines. It adopts the diagonal spiral drug delivery system, with high efficiency and full computer operation control. 450kg/min It has the function of stopping material and shutting down, and is safe and reliable.

 

BCLH-15 The field mixed loading of granular ammonium has explosives.

Main technical performance parameters
project Model	BCLH-15	BCLH-12	BCLH-8	BCLH-4
Loading capacity (ton)	15	12	8	4
Charge efficiency (kg/min)	450	400
Measurement error	2%	2%	2%	2%
Outline size: length * width * height (mm)	10010×2500×3680	9105×2480×3470	7216×2450×3280	6728×2400×2670

 

BCZH-15 on-site mixed HEAVY ANFO TRUCK  

BCZH-15 Field mixed HEAVY ANFO TRUCK

BCZH-15 The on-site mixed heavy ammonium  explosive truck integrates the transportation, mixing and loading of raw materials, and can mix pure emulsion explosives, various proportion of heavy ammonium explosive and ammonium nitrate explosives in the field. It is suitable for open hole mines with water hole and dry hole charge. This kind of vehicle is a multi-functional vehicle with good silo configuration performance. It can be mixed with emulsion explosives in the field. 15t Or ammonium nitrate explosive. 15t Or heavy ammonium explosive. 15t The advanced computer operation system can accurately load two different explosives in the same hole. It has a safety guarantee system with over temperature, over pressure, and material alarm and shutdown. The system is safe and reliable.

Mixed pure emulsion explosive: 200 ~ 280kg / min

Mixed loading of Heave ANFO: 200 ~ 450kg / min

Mixed ANFO explosive: 450kg / min
11470×2500×3900

BCAH-15 Model field mixed heavy ammonium explosive truck

  
BCZH-15 is mainly composed of automotive chassis, power system, hydraulic system, emulsion delivery system, fuel oil system, PPAN delivering system, gasser system, and blender, air cleaning system, MONO pump, electric control system and extinguisher.
 

Explosives Equipment Supplies

 Mobile manufacturing units
We manufacture custom-designed mobile manufacturing units for smaller mining operations.  These MMUs can pump or auger bulk emulsions and ammonium nitrate to produce explosives in blast holes at surface mining operations.  These mobile units are specifically designed as a cost-effective solution for smaller operations.

Process plants
We supply mines that are situated in remote areas with harsh climates which utilise process plants, emulsion plants or blend plants.  This is because these mines often require a huge effort and expense to get all the necessary explosive equipment and products to these sites.  In these cases it makes both financial and safety sense to build process plants on site, in order to provide them with high quality and safe bulk emulsion.

Heavy ANFO units
Our heavy ANFO units are a blend of ANFO and emulsion which, when blended, will increase the bulk density of normal ANFO, making the mixture into a more versatile consistency.

These blends increase the density of ANFO, increasing the energy in the borehole at the same time, resulting in a cost-effective explosive solution and ultimately reducing your mining costs.

ANFO mix units
Ammonium nitrate is the main component in the explosive type most commonly used in the mining sector.  Manufacturing ammonium nitrate fuel oil (ANFO) explosives is fairly easy and involves combining the correct percentages of reactive substances which, when combined, produce a highly effective explosive material.

 

Certifications

Packaging & Shipping

FAQ

1.Are you trading company or manufacturer ? 

We are Group Corporation manufacturer ,have Group Factories Contractor.

2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.

3. What's the delivery time and can you lower the price? 
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
 

4.Can you supply some quick-wear parts? 

Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
 

6.Do you have any used products for sale? 

We have products in stock for choices,the prices are favorable,we'll show you our stock products if you need. 

7.What's the payment terms?

TT 30% as deposit, balance before shipment by TT or at sight.

8. How to guarantee customers get the goods smoothly after they payment? 
Don't worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don't delivery products, the deposit will be returned to you. 

9.How can you ensure the quality of the products? 

Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.