Customization: | Available |
---|---|
After-sales Service: | 24 |
Warranty: | 12 |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
BCLH-15G Top discharge ANFO auger
BCLH-15G intelligent on-site mixed loading overhead ammonium explosives truck is used to mix porous granular ammonium explosives on site. It is mainly used for loading explosives in dry holes in open-pit mines. It adopts box screw, main, top and vertical screw delivery system, The charging efficiency is high, it can realize all-round charging, full computer operation control,with the function of stopping the material, and the work is safe and reliable.
Effective volume of dry tank: 17.3 m3 Loading capacity: 17000kg
Effective volume of fuel tank: 1.14 m3 Loading capacity: 1000kg
Charge efficiency 200-450kg/min
Measurement error ≤ 2%
Total mass 32000kg
Overall dimensions length/width/height (10490 × 2460 × 3792mm)
Main Features
Explosive raw material: granulated ammonium nitrate and diesel can be adjusted separately,
and make two materials reach best proportion, and the explosive can give full play to its energy.
Save labour density and cost.
Charging efficiency is high, blasting cost is low.
All the material will be loaded into the material tanks on the truck through grounding loading device, when reach the working site, mix and charge, real explosive can be formed, very safe and reliable.
The unfinished material can be returned, it is a high-technology product which integrated material transportation,
explosive mixing&making, hole charging etc. It can be named as mobile mini high-efficient explosive factory.
1 Application condition
1.1 Suitable for no-water hole charging, hole diameter ≥100mm
1.2 Suitable for open pit field touch working condition, can operate in hot summer cold winter,
sand-wind weather, low temperature etc. Working temperature range is -45ºC---+45ºC.
1.3 Can work normally under air relative humidity with 10%~90%.
1.4 Can work at the elevation of 2640m-5000m.
1.5 After years of application experience, SINOTRUCK chassis can fit for various mine tough road,
with excellent shock-absorption performance.
1.6 Braking system: Travelling brake(foot brake), auxiliary braking(Engine exhaust brake), emergency brake
(hand brake),good performance, when fully loaded, can reach the driving requirements of complex pavement.
Seq. | Name | Model | Specification | Manufacturer | Origin | Note |
1 | ANFO mixing&charging truck |
BCLH-15G | ANFO mixing & charging truck | CHINA | CHINA | |
2 | Charging capacity | 15000kg | ||||
3 | Charging efficiency | 150-220kg/min | ||||
4 | Deviation | ±2% | ||||
5 | Chassis | 6x4 / 6*6/ 8x4 | Total mass 31000kg | SINOTRUCK /BEIBEN /SHACMAN | CHINA | |
6 | Engine |
MC07.340 WP10.340 |
Power 249kw |
SINOTRUCK WEICHAI |
GB IV | |
7 | Gearbox |
HW13710C 9JS119 |
SINOTRUCK /BEIBEN /SHACMAN | CHINA | ||
8 | Rear axle |
457 Benz MAN |
Ratio 6.833 | SINOTRUCK /BEIBEN /SHACMAN | CHINA | |
9 | Braking system | Travelling brake, auxiliary brake and parking brake | SINOTRUCK /BEIBEN /SHACMAN | CHINA | ||
10 | Hydraulic motor | PVHW-45 | Pressure compensation variable pump | VICKERS | USA | |
11 | Hydraulic motor | 104-1068 104-1065 104-1063 |
Low speed, big torque | EATON | USA | |
12 | Integrated valve block | For motor steering, rotation speed control | YUKEN | CHINA | ||
13 | ANFO mixing&making system | BCLH-15.7.2 Straight spiral assy. |
Efficiency 150-220kg/min |
CHINA | CHINA | |
14 | ANFO mixing&making system | BCLH-15.7.3 Top spiral assy. |
Efficiency 150-220kg/min |
CHINA | CHINA | |
15 | Flow meter | DN25 | Double indication system, teleportation signal, material shortage alarm and stop function | CHINA/JAPAN | JAPAN | |
16 | Control panel | Main board: FXIN-40MR |
Data processment | MITSUBISHI | JANPAN | |
17 | Control panel | Touch screen: F930GOT-BWD-C | PLC touch screen show | MITSUBISHI | JANPAN |
BCLH-15G Field mixed loading granular ammonium frying truck
On site mixing of granular ammonium frying vehicle ( BCLH Series of products can be mixed with porous granular ANFO in the field. It is mainly used for dry hole loading explosives in open-pit mines. It adopts the diagonal spiral drug delivery system, with high efficiency and full computer operation control. 450kg/min It has the function of stopping material and shutting down, and is safe and reliable.
BCLH-15 The field mixed loading of granular ammonium has explosives.
Main technical performance parameters | ||||
project Model |
BCLH-15 | BCLH-12 | BCLH-8 | BCLH-4 |
Loading capacity (ton) | 15 | 12 | 8 | 4 |
Charge efficiency (kg/min) | 450 | 400 | ||
Measurement error | 2% | 2% | 2% | 2% |
Outline size: length * width * height (mm) | 10010×2500×3680 | 9105×2480×3470 | 7216×2450×3280 | 6728×2400×2670 |
BCZH-15 Field mixed HEAVY ANFO TRUCK
BCZH-15 The on-site mixed heavy ammonium explosive truck integrates the transportation, mixing and loading of raw materials, and can mix pure emulsion explosives, various proportion of heavy ammonium explosive and ammonium nitrate explosives in the field. It is suitable for open hole mines with water hole and dry hole charge. This kind of vehicle is a multi-functional vehicle with good silo configuration performance. It can be mixed with emulsion explosives in the field. 15t Or ammonium nitrate explosive. 15t Or heavy ammonium explosive. 15t The advanced computer operation system can accurately load two different explosives in the same hole. It has a safety guarantee system with over temperature, over pressure, and material alarm and shutdown. The system is safe and reliable.
BCAH-15 Model field mixed heavy ammonium explosive truck
Rated capacity | 30t |
Gross weight | 51.525t |
Front axial load | 17.175t |
Back axial load | 34.35t |
Minimum ground clearance | 475mm |
Minimum turning radius | 8.7m |
Engine maximum power | 256Kw |
Loading minimum running speed | 50Km/h |
№ | Name | Specification | Unit | Quantity | Standart | Note |
1 | Type /Mark/ | SINOTRUCK HOWO BCZH-15 | ||||
2 | Model | Mixing charge machine for emulsion explosive /HEAVY ANFO TRUCK/ | ||||
3 |
Техникийн злэлт |
Chassis | BRAND: SINOTRUCK HOWO |
|||
Engine capacity | kwt | 340 more | ||||
Fuel type | Diesel Euro-II; Euro-III | |||||
Drive wheel formulation | 8х4 | chassis | ||||
Wheel formula | mm | 1950+3800+1400 | ||||
Cabin | Without sleeping bed | |||||
Engine | MAN MC 340HP | |||||
Transmission | HW19710 transmission + HW70 flange type power take- off |
|||||
Front axle | MAN VPD060QB front axle (disk) | |||||
Chimney system | Smoke evacuation (with fire lid) | |||||
Tires | 12.00R20 /steel tires/ | |||||
Fire extinguisher | one pieces for machine, two pieces for equipment | |||||
Warnings | Hazardous freight warnings according to Mongolian law and regularity must be sticked /4 sides of the machine / | |||||
Amber light | On the cabin-1 pieces Equipment -1 pieces |
|||||
Other directions | PTO option: /front and bottom protection/ Speed limiter device, speed limit 60 km/hour |
|||||
Brake system | ABS (4S / 4M) | |||||
Fuel tank | Min-200 L / aluminum alloy fuel tank/ | |||||
Others | / The vehicle meets the conditions of adapting to the working conditions of the plateau and cold regions./ |
|||||
Steering wheel | Left HT457 rear dual drive axle (drum) |
№ | Name | Specification | Unit | Quantity | Standart | Note |
Axle's loading capacity | kg | 6500кг / 7000кг / 17500к | ||||
Loading | kg | Not less than 15000 | ||||
Over all weight | kg | Not less than 32000 | ||||
Dimension of the machine and equipment | mm | Max-Length /10360, Width 2500 , Height 3750 | ||||
Mixing charger device of material | Stainless steel | |||||
Amount of explosives | kg | 15000 | Min | |||
Emulsion/ANFO ratio | % | 70/30 | ||||
Borehole charging depth | m | 20-30 | ||||
Borehole charging speed | kg/min |
150-260 |
Min |
|||
Measurement error, | % | ± 2 | ||||
Borehole charging diameter | mm |
70-320 | ||||
Storage tank for produced emulsion /equipment/ |
M3/kg/ |
Min-8,4 /10500/ |
||||
Porous ammonia container /equipment/ |
M3/kg |
Min-3,4 /4500/ |
||||
Water tank volume, /equipment/ |
м3 |
Min-0,4 |
For water curtain hose | |||
Sensor tank volume /equipment / |
м3 |
Min-0,5 |
||||
Volume of sodium nitrite storage tank /equipment/ |
м3 |
Min-0,2 |
||||
Diesel fuel tank volume, /equipment/ |
м3 |
Min-1,0 |
||||
Charger hose length | м | Min-25 | ||||
Location of tank loading | Pour over the tank loading | |||||
Water jacket creating system |
NO. | Code | Title | Qty. |
1 | BCZH20.6-1 | Centre plate wood block | 1 |
2 | BCZH20.6-2 | Polystyrene plate | 1 |
3 | BCZH20.6-3 | Strengthen channel steel | 6 |
4 | BCZH20.6-4 | Lower horizontal channel steel | 2 |
5 | BCZH20.6.1 | Tank shell unit assembly | 1 |
6 | BCZH20.6-5 | Polystyrene filler block | 54 |
7 | BCZH20.6-6 | Middle horizontal channel steel | 2 |
8 | Polyurethane coating | 1 pail | |
9 | BCZH20.6-7 | Coupling flange | 4 |
10 | GB5782-86 | Bolt M18×160 | 4 |
11 | GB6170-86 | Nut M18 | 4 |
12 | GB97.1-85 | Washer 18 | 4 |
13 | GB93-87 | Washer 18 | 4 |
14 | BCZH20.6.2 | Walk bedplate assembly | 1 |
15 | BCZH20.6.3 | Vent cap | 1 |
16 | BCZH20.6-8 | Vent cap connection tube | 1 |
17 | BCZH20.6.4 | Manhole cover assembly | 1 |
18 | CKB/J01-87 | Quick tie-in: DC-ZG2 | 1 |
19 | BCZH20.6-9 | 2Tie-in | 1 |
20 | Quick tie-in: A-ZG2 | 1 | |
21 | BCZH20.6-10 | Upper horizontal channel steel | 2 |
22 | BCZH20.6-11 | U-shaped bolt M24 | 4 |
23 | GB6170-86 | Nut M24 | 8 |
24 | GB97.1-85 | Washer 24 | 8 |
25 | GB93-87 | Washer 24 | 8 |
26 | BCZH20.6-12 | Cushion block | 4 |
27 | DEMCO3X175PST | Butterfly valve 3 | 1 |
28 | BCZH20.6.5 | Emulsion tank assembly | 1 |
29 | BCZH20.6-13 | Lower backing channel steel | 6 |
30 | BCZH20.6-14 | Upper vertical channel steel | 2 |
31 | BCZH20.6-15 | Lower vertical channel steel | 2 |
32 | BCZH20.6-16 | Girder backing channel steel | 2 |
33 | BCZH20.6-17 | Bottom channel steel | 6 |
34 | BCZH20.6-18 | Wood stopper | 70 |
35 | BCZH20.6-19 | Lower erect channel steel | 14 |
36 | BCZH20.6-20 | Upper erect channel steel | 14 |
37 | BCZH20.6.6 | Tank inner lining assembly | 1 |
38 | BCZH20.6-21 | Pass wire pipe | 1 |
39 | Clearance lamp side light | 2 | |
40 | BCZH20.6-22 | Clearance lamp side light frame | 2 |
41 | BCZH20.6-23 | Middle vertical channel steel | 2 |
42 | BCZH20.6-24 | Sealing plateδ4 | 1 |
1.Are you trading company or manufacturer ?
We are Group Corporation manufacturer ,have Group Factories Contractor.Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.