Asme Pressure Vessel Heads (Hemispherical Heads)HHA2100mm*120mm SA516 Gr70N
Head For Tank body Building ( Dished Heads End Cap Stainless/Carbon Steel or Alloy Materials Elliptical Ellipsodial Torispherical Conical Hemispherical)
Elliptical Heads
Torispherical Heads
Dished Head
Joggle Dished Head
Dished Head with Hot Press
Hemispherical Dished Head by Cold Press
Detailed Photos
Asme Pressure Vessel Heads (Hemispherical Heads)HHA2100mm*120mm SA516 Gr70N
CUSTOM PRESSURE VESSEL HEAD ( HEMISPHERICAL HEADS) HHA1600mm*160mm SA516 Gr70N
CUSTOM PRESSURE VESSEL HEAD ( HEMISPHERICAL HEADS) HHA 1219.2mm*85mm SA516 Gr70N
Product Parameters
Shape:Duplex steel,carbon steel,stainless steel,aluminum,titanium and etc.
Reduction ratio:about 10%
Technology:Hot pressing,cold pressing
Surface treatment:sand blasting,pickling
Usage:pressure vessel , heat exchanger , LPG, LNG tanks and so on
| Brand Name: |
DR |
| Diameter: |
89mm--10000mm |
| Thickness: |
2mm--300mm |
| Reduction Ratio: |
About 10% |
| Material: |
Duplex steel,carbon steel,stainless steel,aluminum,titanium and etc. |
| Technology: |
Hot pressing, Cold pressing |
| Surface Treatment: |
Sand Blasting,Pickling |
| Test: |
UT,RT,MT,PT,TOFD. |
| Applicable Standard: |
ASME, PED |
| Certificate: |
ISO9001 ,ISO45001,OHSAS18001 |
| Applications: |
Petroleum, chemical industry, water conservancy, electric power,boiler, machinery, metallurgy, sanitary construction etc. |
| Packaging: |
wooden box and iron shelf or as percustomers requirement |
| Customized Product |
Support |
Minimum Thickness Tank Dish Head
FAQ
Ellipsoidal Head (EHA OR EHB) Inspection standard
Section shape gap: Outside convex≤1.25%Di; Inside concave≤0.625%Di. (Full size sample plate whose chord length is equal to Di is used for measurement.)
1.Measure four inside diameters which distribute in the same distance at straight edge. The difference between the measured maximum value and the measured minimum value is the roundness tolerance.
2.The roundness tolerance is not larger than 0.5 % Di, and 25mm;
3.While δ s/Di < 0.005 , and δ s < 12mm, the roundness tolerance is not larger than 0.8 % Di, and 25mm.
| The tolerance of slope and dimension and groove roughness |
| program |
Tolerance |
| Groove Angle |
± 2.5° |
| Obtuse Width |
± 1mm |
| Groove Roughness |
|
| No defects such as flow, layered, inclusion are allowed. |
|
| External circumference tolerance and inside diameter tolerance |
| Nominal diameter |
Steel products thickness |
inside diameter tolerance ID |
External circumference tolerance |
| DN < 600 |
2 ≤ δ s < 4 |
± 1.5 |
± 4 |
| 4 ≤ δ s < 6 |
± 2 |
± 6 |
| δ s ≥ 6 |
± 3 |
-3~ 9 |
| 600 ≤ DN < 1000 |
2 ≤ δ s < 4 |
± 2 |
± 6 |
| 4 ≤ δ s < 6 |
± 2 |
± 6 |
| δ s ≥ 6 |
± 3 |
-3~ 9 |
| DN ≥ 1000 |
all |
± 3 |
-3~ 9 |
|
Notes:While Di ≥ 1000 and δs < 10mm , take external circumference tolerance as criterion. The inside diameter tolerance or the external circumference tolerance can be decided through the discussion between the two parties.
Notes:1 Standard length of external circumference = (inside diameter nominal thickness 2 ) π (3.1416). 2 Under the circumstance of inside diameter tolerance, measure four inside diameters which distribute in the same distance at straight edge, and take the average value of measured inside diameter. |
| Surface quality |
1.The measured minimum thickness of welding seam shall not be less than the minimum guaranteed thickness. The welding seam height should not be 0.5mm lower than mother material.
2.Under the circumstance of step stamping, circle impression will be taken place. The gap measured by sample plate should be less than 1.5mm .
3.The pits on the material surface should be ground. The grinding depth should be less than 5% δ s and 2mm . Otherwise compensating welding is needed.
4.The depth of the riffle on end cover surface shall not be larger than 0.2mm . While the ground area on end cover is less than 20%, surface treatment should be done over whole end cover.
5.If customers have special requirements for end cover surface, shall follow the customers' requirements. |
Tank dish Head manufacturing range
| Standard Dished Heads for Tank |
| Diameter |
Thickness(Mm) |
Material |
Exw Unit Price |
|
| ND1440 |
8 |
Q235-A |
USD |
413.00 |
Per piece |
| ND1528 |
8 |
Q235-A |
USD |
427.00 |
|
| ND1570 |
6 |
Q235-A |
USD |
420.00 |
|
| ND1716 |
6 |
Q235-A |
USD |
445.00 |
|
| ND1750 |
6 |
Q235-A |
USD |
457.00 |
|
| ND1900 |
6 |
Q235-A |
USD |
465.00 |
|
| ND1980 |
6 |
Q235-A |
USD |
472.00 |
|
| ND2500 |
6 |
Q235-A |
USD |
459.00 |
|
| ND2000 |
6 |
Q235-A |
USD |
446.00 |
|
| ND2100 |
5 |
Q235-A |
USD |
429.00 |
|
| ND2100 |
6 |
Q235-A |
USD |
479.00 |
|
| ND2150 |
6 |
Q235-A |
USD |
493.00 |
|
| ND2600 |
6 |
Q235-A |
USD |
582.00 |
|
| ND2420 |
6 |
Q235-A |
USD |
541.00 |
|
| ND2250 |
6 |
Q235-A |
USD |
501.00 |
|
| ND2450 |
6 |
Q235-A |
USD |
544.00 |
|
| ND2300 |
6 |
Q235-A |
USD |
509.00 |
|
| ND2200 |
6 |
Q235-A |
USD |
488.00 |
|
| ND2400 |
6 |
Q235-A |
USD |
532.00 |
|
| ND2400 |
5 |
Q235-A |
USD |
509.00 |
|
| ND2480 |
6 |
Q235-A |
USD |
551.00 |
|
| ND2550 |
6 |
Q235-A |
USD |
568.00 |
|
Torispherical Head (Type THA, THB, XD OR MD)
Stainless Steel Flanged&Reverse Dished Head
Tank Container Head (ID2180*6)
Cryogenic Vessel Head
Flange (BL/TH/SW/WN/LJ/SO)
Flange Only Dished Head (FHA)
Flange Only Dished Head (FHA)
Dished End
Dished End
Dished Heads with Hole (SHD)
Dished End (DHA)
Dished End (MD)
Dished&Flared
ASME Elliptial Head
Saddle
Stainless Steel Cutting Parts
En ISO/PED/ASME U U2 Stamp Certificated Dish End Dished End Cap Stainless/Carbon Steel or Other Materials Dish Head Made by Cold/Hot Press&Spinning or Segment.
Fermenter Tank Dished Heads
Cold Press Dished End with Carbon Steel
Stainless Steel Hemispherical Head
Stainless Steel Dished Head 2: 1 True Ellipsoidal Dished Head End by Segment and Petals Forming
Cold Press Dished End
Cold Press Dished End
Forming Heads by Hot Press
Carbon Steel Dished Head
Petal Fabrication Hemispherical Ends
Carbon Steel SA516gr70 Hemispherical Heads
LPG Tank Head with Carbon Steel
Stainless Steel 304 Dished Only Heads
FOB Price: US $4.4-7.8/ kg
Dished Head Transport Packing Solutions
Cone Type Heads by Single Piece
FOB Price: US $3.4-3.6 / kg
Copper Elliptical 2: 1 Dished Ends
10% Torispherical Dished Head with Cold Forming
FOB Price: US $1-99,999 / kg
Varied Dished Ends with Clad Plates
Heavy Dished Ends for Sugar Plants
Stainless Steel Cone for Heat Exchangers
FOB Price: US $1-99,999 / kg
Cold Pressed 2: 1 Ellipsoidal Head
SA240-304 Flange Only Dished Heads
FOB Price: US $1-99,999 / kg
Stainless Steel Dished Head Ellipsoidal Dishe Head Made by Cold Press&Spinning for Food, Oil&Gas Industry Equipment, Pressure Vessel etc.
Ellipsoidal Head by Hot Press
10% Torispherical Head by Cold Press
Flanged Only Head 2075*6mm by Cold Spinning
10% Torispherical Head 700*8mm by Cold Press
10% Torispherical Head 1100*3mm by Cold Press
Ellipsoidal Head 4000*10mm by Cold Spinning
Dished Only Head 1100*5mm Cold Spinning
10% Torispherical Head 1450*6mm by Cold Press
Cone Head 850*4mm by Cold Spinning
10% Torispherical Head 1600*3mm by Cold Press
Ellipsoidal Head 1300*10mm by Cold Press
10% Torispherical Head 1200*3mm by Cold Press
10% Torispherical Head 1700*3mm by Cold Press
Ellipsoidal Head 1000*7.9mm by Cold Press
Ellipsoidal Head 800*6.4mm by Cold Press
Ellipsoidal Head 5200*16mm by Cold Spinning
10% Torispherical Head 300*4mm by Cold Press
Dished&Flared Head 538*6mm by Cold Press
Ellipsoidal Head 219*3mm by Cold Press
10% Torispherical Head 2384*8mm by Cold Spinning
Approximate Elliptical Head 1320*11mm by Cold Press
Cone Head 1300*12mm by Cold Spinning
Shallow Torispherical Head 1006*3mm by Cold Spinning
Ellipsoidal Head 3400*54mm by Hot Spinning
Elliptical Head 3500*70mm by Hot Press
10% Torispherical Head 700*6mm by Cold Press
10% Torispherical Head 1800*3mm by Cold Press
10% Torispherical Head 600*4mm by Cold Press
Ellipsoidal Head 450*22mm by Hot Press
Ellipsoidal Head 650*3mm by Cold Press
Flanged Only Head 1955*8mm by Cold Spinning
10% Torispherical Head 450*2mm by Cold Press for Pressure Vessel Food Beer Can Gas and Oil Industry etc.
10% Torispherical Head 500*3mm Made by Cold Press for Pressure Vessel Food Beer Can Gas and Oil Industry Petrochemical Industry etc.
10% Torispherical Head 1700*3mm Made by Cold Press for Pressure Vessel Food Beer Can Gas and Oil Industry Petrochemical Industry etc.
PED Certified Stainless Steel 10% Torispherical Head Made by Cold Press for Pressure Vessel Food Beer Can Gas and Oil Industry Petrochemical Industry etc.
Stainless Steel Ellipsoidal Head 700*4mm by Cold Press for Gas and Oil Industry, Petrochemical Industry, Food, etc
PED Certified Stainless Steel Torispherical Head 1100*8mm Made by Cold Spinning for Pressure Vessel Food Beer Can Gas etc.
Stainless Steel Ellipsoidal Head 6000*22mm by Segment Cold Spinning
Stainless Steel Special Shape Dish Head Made by Cold Press
Stainless Steel Dish Head 10% Torispherical Dished Head 2000*4mm Made by Cold Press for Pressure Vessel Food Beer Can Gas etc.
Stainless Steel Ellipsoidal Dish Head Made by Segment and Petals Forming
Stainless Steel Ellipsoidal Dish Head 800*3mm by Cold Press for Gas and Oil Industry, Petrochemical Industry, Food, etc
Stainless Steel Ellipsoidal Dish Head 800*5mm by Cold Press for Gas and Oil Industry, Petrochemical Industry, Food, etc
Stainless Steel Dish Head Shallow Torispherical Dished Head 4350*12mm Made by Cold Spinning for Pressure Vessel Food Beer Can Gas etc.
Stainless Steel Hemispherical Dish Head 1850*6mm Made by Segment and Petal Fabrication for Gas&Oil Industry etc.
Stainless Steel 10% Torispherical Dish Head 1400*10mm Made by Cold Press for Pressure Vessel Food Beer Can Gas and Oil Industry Petrochemical Industry etc.
Stainless Steel Hemispherical Dish Head 2200*45mm Made by Spinning for Oil&Gas Industry Pressure Vessel etc.
Stainless Steel 10% Torispherical Dish Head 2200*4mm Made by Cold Press for Pressure Vessel Food Beer Can Gas and Oil Industry Petrochemical Industry etc.
Stainless Steel 10% Torispherical Dish Head 1400*2mm Made by Cold Press for Pressure Vessel Food Beer Can Gas and Oil Industry Petrochemical Industry etc.
Stainless Steel Shallow Torispherical Dish Head 427*4mm by Cold Press for Food Pressure Vessel Oil&Gas Industry Equipment etc.
Stainless Steel Ellipsoidal Dish Head 406*3mm by Cold Press for Gas and Oil Industry, Petrochemical Industry, Food, etc
Stainless Steel Flanged Only Dish Head 1277*5mm by Cold Spinning for Tank Food Beer Can etc.
FOB Price: US $1-999,999 / Piece
Stainless Steel 10% Torispherical Dish Head 800*6mm Made by Cold Press for Pressure Vessel Food Beer Can Gas and Oil Industry Petrochemical Industry etc.
Stainless Steel Ellipsoidal Dish Head 750*2mm by Cold Press for Gas and Oil Industry, Petrochemical Industry, Food, etc
Stainless Steel Dished Head Ellipsoidal Dish Head 2800*20mm by Cold Press for Gas and Oil Industry, Petrochemical Industry, Food, etc
Stainless Steel Dished Head 10% Torispherical Dish Head 850*3mm Made by Cold Spinning for Food Beer Can Gas&Oil Industry Petrochemical Industry etc.
Stainless Steel Dished Head Ellipsoidal Dish Head 950*2mm Made by Cold Press for Gas&Oil Industry Equipment, Petrochemical Industry, Food, etc
Aluminium Plate Dished Head Ellipsoidal Dish Head 400*3mm by Cold Press
Titanium Sb265gr2 Dished Head Hemispherical Dish Head 1000*10mm Made by Hot Press
Stainless Steel Dished Head Hemispherical Dish Head 800*3mm Made by Cold Press for Oil&Gas Industry Pressure Vessel etc.
Stainless Steel Dished Head Dished&Flared Dish Head 496*6mm by Cold Press
Stainless Steel Dished Head 10% Torispherical Dish Head 800*2mm Made by Cold Press for Pressure Vessel Food Beer Can Gas and Oil Industry etc.
Stainless Steel Dished Head Shallow Torispherical Dish Head 500*3mm by Cold Press for Food Pressure Vessel Oil&Gas Industry Equipment etc.
Stainless Steel Dish End Dished Only Dish Head 1850*6mm Made by Spinning for Pressure Vessel Tank etc.
Stainless Steel Dish End Torispherical Dish Head 800*6mm by Cold Press for Pressure Vessel Food Beer Can Gas and Oil Industry Petrochemical Industry etc.
Stainless Steel S32168 Dish End Ellipsoidal Dish Head 2800*16mm Made by Cold Press for Gas&Oil Industry Equipment, Petrochemical Industry, Food, etc
Stainless Steel Dished Head Ellipsoidal Dish Head 2400*8mm Made by Cold Press for Gas&Oil Industry Equipment, Petrochemical Industry, Food, etc
ASME U Certificated Dished Head Stainless Steel SA240-304 Torispherical Dish Head 1600*4mm by Cold Press for Pressure Vessel Food Beer Can Gas and Oil Industry.
Stainless Steel S31603 Dished Head Hemispherical Dish Head Cap 3500*60mm Made by Segment and Petals Forming for Oil&Gas Industry Pressure Vessel etc.
Segment&Petals Forming Dished Head Cap Torispherical Dished End
Stainless Steel SA240-304L Dished End Ellipsoidal Dish Head 6400*22mm Made by Segment&Petals Forming for Tank Pressure Vessel Oil&Gas Industry Equipment etc.
Stainless Steel Dished Head Flanged Only Dish Head 1761*8mm by Cold Spinning for Tank Food Beer Can etc.
Stainless Steel Dish End Torispherical Dish Head 1100*6mm by Spinning for Pressure Vessel Food Beer Can Gas and Oil Industry Petrochemical Industry etc.
Stainless Steel 304 Dished Head End Cone Dish Head 954*4mm by Cold Spinning
Stainless Steel Dished End Torispherical Dish Head 790*4mm by Cold Spinning for Food Pressure Vessel Tank Oil&Gas Industry Equipment etc.
Stainless Steel S30408 Dish End Dished Only Dish Head 1434*6mm Made by Spinning for Pressure Vessel Tank etc.
Stainless Steel Dished End Cap Ellipsoidal Dish Head 3000*12mm Made by Cold Press for Gas&Oil Industry Equipment, Petrochemical Industry, Food, etc
Stainless Steel S30408 Dished End Cap Ellipsoidal Dish Head 4000*10mm Made by Cold Spinning for Gas&Oil Industry Equipment, Petrochemical Industry, Food, etc
Carbon SA516gr70n Dish End Ellipsoidal Dished Head 2500*14mm Made by Cold Spinning with Pipe&Flange Connected
Stainless Steel Dished End Hemispherical Dish Head Cap Made by Segment and Petals Forming for Oil&Gas Industry Pressure Vessel etc.
Stainless Steel Dished Head S30408 Dished End Ellipsoidal Dish Head 2800*20mm Made by Cold Press for Gas&Oil Industry Equipment, Petrochemical, Food, etc
Stainless Steel 331603 Dished End Torispherical Dish Head 1700*8mm Made by Cold Press for Food Pressure Vessel Tank Oil&Gas Industry Equipment etc.
Stainless Steel Dished Head Flanged&Reverse Dished Ends Made by Cold Spinning for Food Pressure Vessel Tank etc.
Stainless Steel 316L Dished End Torispherical Dish Head 1400*12mm Dished Cap Made by Cold Press for Food Pressure Vessel Tank Oil&Gas Industry Equipment etc.
Stainless Steel Dished End Torispherical Dished Head 1114*4mm by Cold Spinning for Food Pressure Vessel Tank Oil&Gas Industry Equipment etc.
Stainless Steel Dished Head S30408 Dished End Ellipsoidal Dish Head 2100*10mm Made by Cold Press for Gas&Oil Industry Equipment, Petrochemical, Food, etc
Stainless Steel Dished Head S30408 Dished End Ellipsoidal Dish Head 2000*10mm Made by Cold Press for Gas&Oil Industry Equipment, Petrochemical, Food, etc
Stainless Steel Dished Head SA240-304 Dished End Approximate Ellipsoidal Dish Head 1320*11mm Made by Cold Press for Gas&Oil Industry Equipment, Food, etc
Stainless Steel Dished Head 3042b Dished End Torispherical Dish Head 800*4mm by Cold Spinning for Food Pressure Vessel Tank Oil&Gas Industry Equipment etc.
Stainless Steel Dished Head S30408 Dished End Hemispherical Dish Head 600*4mm Made by Cold Press for Oil&Gas Industry Pressure Vessel etc.
Stainless Steel Dished Head S30408 Dished Cap 2: 1 Ellipsoidal Dish Head 3000*12mm Made by Cold Press for Gas&Oil Industry Equipment, Food, etc
U Stamp Certificated Dished Head Stainless Steel SA240-304 Dished Cap 2: 1ellipsoidal Dish Head 1836*9mm by Cold Press for Gas&Oil Industry Equipment, Food, etc
Stainless Steel Dished End S31603 Dish End Torispherical Dish Head 1600*4mm by Cold Press for Food Pressure Vessel Tank Oil&Gas Industry Equipment etc.
Stainless Steel Dish End S30403 Dished Head Cone Dish Head 3100*20mm by Cold Spinning
Stainless Steel Dish End S31603 Dished End Cap Hemispherical Dish Head 3350*60mm Made by Segment&Petal Forming for Oil&Gas Industry Pressure Vessel etc.
Stainless Steel Dish End SA240-304 Dish Head Approximate Elliptical Head End Cap 1320*11mm by Cold Press for Gas&Oil Industry Equipment, Food, etc
Stainless Steel Dish End S31603 Dish Head Elliptical Head End Cap 4000*12mm by Cold Spinning for Gas&Oil Industry Equipment, Food, etc
ASME U Stamp Certificated Stainless Steel Dish End SA240-304 Dish Head Elliptical Head End Cap 1836*9mm by Cold Press for Gas&Oil Industry Equipment, Food, etc
Stainless Steel Dished End SA240m-304 Dish Head Elliptical Dished Head End Cap 2300*74mm by Hot Press for Gas&Oil Industry Equipment, Food, etc
Stainless Steel Dished End Elliptical Dish Head 1500*6mm Made by Cold Press
Carbon Steel Sm520b Dished End Elliptical Dish Head End Cap 800*6.4mm Made by Cold Press.
){kind=link}