| Customization: | Available |
|---|---|
| After-sales Service: | 2 Years |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Serial number | Technical description | Unit | Quantity | |
| 1 | Chassis | Truck chassis Model: SINOTRUK HOWO 4X4 ZZ2182 |
A | 1 |
| 2 | Drive mode: 4x4 left rudder | |||
| 3 | Engine model and power: WP10H400E62, 400HP | |||
| 4 | Transmission case: 2000 | |||
| 5 | Transmission: HW19710. | |||
| 6 | Steering gear: Z-F power steering, model Z-F8118 | |||
| 7 | Suspension: leaf springs | |||
| 9 | Front axle: Max. 9000 kg, with shock absorber, drum brake Rear axle: maximum load 16000 kg, with shock absorber, drum brake |
|||
| 10 | Tires: 12.00R20 steel tires, one spare tire | |||
| 11 | Cab: two-seater, dual-arm wiper system, three-speed, adjustable seat damping, with heating and ventilation system, front sunshade, seat belt, adjustable steering wheel, air horn, air conditioning. With lateral stabilizer, with four-point floating suspension + shock absorber |
|||
| 12 | Electrical system: Operating voltage: 24V, negative grounding Battery: 180Ah Cigarette lighter, horn, headlight, brake light, side marker light, reversing light |
|||
| 14 | Roller | Roller:Capacity: 1800m/10.4 mm cable | A |
1 |
| Maximum speed: ≥ 400m/min |
||||
| Maximum pull force: 4800 lbs (21.0 KN UNK2) | ||||
| Winch handle, electric proportional control handle + hydraulic control standby handle |
A | 1 | ||
| 15 | Brake assembly | Pneumatic tandem band brake system (primary) and parking brake system (secondary) |
Set | 1 |
| 16 | Hydraulic system | German Rexroth brand Close loop Hydraulic system with REXROTH JFT26 Variable displacement pump for winch driving Rexroth 80 motor,90 oil pump |
Set | 1 |
| 17 | Measurement system | Brand: Benchmark | Set | 1 |
| Use of cables | ||||
| Applicable cable diameter of measuring: 10.4 mm | ||||
| Depth measuring system and tension measuring system | ||||
| 18 | Carriage | External aluminum plate, internal stainless steel plate and carbon steel frame of the carriage | ||
| 19 | The entrance door on the driver's side of the cab has a tinted glass window and the cab has a fixed glass window on the other side | |||
| 20 | Foldable ladder with handrail on the driver's side for safe access to the operator's cabin | |||
| 21 | Central wall with fixed or open-able window | |||
| 22 | Both sides of the well testing truck are equipped with lamps and lockable doors, which can store downhole tools, blowout prevention boxes, pulleys, large wrenches, jars, etc. | |||
| 23 | All side compartments can be opened with the same key. | |||
| 25 | Operating room: | A | 1 | |
| 26 | The glass window of the middle partition wall is provided with a steel mesh to prevent the steel wire from striking and the glass from splashing. | |||
| 27 | Two air conditioners, cooling 12000BTU each |
|||
| 28 | Two small wall-mounted fans for AC or AC failure | |||
| 29 | Coffee pot | |||
| 30 | Medium wave/FM radio | |||
| 31 | Microwave Oven | |||
| 32 | Water dispenser, hot/cold water | |||
| 33 | Winch ergonomic chair | |||
| 34 | Bench for three | |||
| 35 | Two plastic chairs. | |||
| 36 | Plastic grass pattern carpet | |||
| 37 | 24 Volt LED | |||
| 38 | Digital clock on panel | |||
| 39 | Control Panel | A | 1 | |
| 40 | Stainless steel winch control panel (Benchmark winch panel) |
|||
| 41 | Main Hydraulic System Pressure Gauge, Control Pressure and Hydraulic Oil Temperature |
|||
| 42 | Intelligent monitoring system: digital display of measured depth, tension, speed, jarring speed, and data can also be downloaded to verify the process of abnormal operation (Benchmark winch panel) | |||
| 43 | Winch compartment | A | 1 | |
| 44 | Winch frame bolting to floor | |||
| 45 | The heavy sub-frame connects the winch to the chassis | |||
| 46 | The sub-frame includes an oil pan and a 1-1/2 "dirty oil drain port |
|||
| 47 | The depth of the measuring system is metric, and the tensio-meter is pound. The depth measuring system and the tensio-meter must be two sets of digital and mechanical systems (the mechanical system uses Benchmark's backup depth system). | |||
| 54 | Electrical system | One set of distribution box, fire retardant cable, aviation plug, socket, internal/external power conversion equipment, generator and external power connection can be controlled by the switch of distribution box, anti-leakage protection device, power indicator: voltage, current, frequency |
Set | 1 |
| 55 | Roller light, two AC lights (glass cover and protective cover), two rotatable DC wellsite lights installed at the rear of the well testing truck, and two 220V wellsite spot lights | |||
| 56 | One set of external power plug and socket | |||
| 57 | Generator | Japan made diesel generator: 6.0 KVA, 220V/50Hz | 1 | |
| 58 | Pneumatic system | Including the air compressor, gas cylinder, an air dryer, pressure relief valve, air filter separator assembly, etc., and the required pneumatic operation equipment | Set | 1 |
| 59 | Auxiliary equipment | Bench vice for parking space, bolt fixing method | Set | 1 |
| 60 | The four corners of the carriage have rotatable led spotlights, each 500 w. | |||
| 61 | The air compressor inflates the tires (the chassis air source can be used after communication, and the air meter and inflating pipeline shall be provided) | |||
| 62 | The front part of the well testing truck is provided with a towing hook | |||
| 63 | Assemble and complete | Psi/lbs for all gauges, lbs for hydraulic tension only | Set | 1 |
| 64 | All sockets are G type | |||
| 65 | All accessories are new, not used and reassembled | |||
| 66 | The axle load must not exceed the rated axle load | |||
| 67 | All equipment complies with ISO9001 and latest relevant/appropriate manufacturing standards | |||
){kind=link}