Petroleum Oilfield Drilling Special Vehicle Shacman 10X4 Truck-Mounted 60 Ton 4000m Workover Rig

• Customization: Available
• After-sales Service: 24 Hours Support
• Warranty: 24 Months
• Model NO.: Shacman DTYJ5460TXJ
• Certification: CE, ISO 9001:2000, ISO 9001:2008
• Condition: New
• Motor: AC Motor
• Drill Hole Diameter: 140-400mm
• Drill Hole Depth: >300m
• Bit Type: Drag Bit
• Drilling Way: Rotary
• Workover Depth: 4000m
• Service Depth: 3200m
• Mast Height: 18 M, 23m, 29m, 32m
• Wirelines Diameter: 22, 26
• Lifting Speed of Hook: 1-1.5m/S
• Max. Hook Load: 900kN
• Rated Hook Load: 600kN
• Transport Package: Naked
• Specification: 19900/18000X2550X4000mm
• Trademark: DRZ
• Origin: China
• HS Code: 8705909990
• Production Capacity: 10000
• Package Size: 1990.00cm * 255.00cm * 400.00cm
• Package Gross Weight: 45600.000kg

Product Description

Petroleum Oilfield Drilling Special Vehicle SHACMAN 10X4 Truck-Mounted 60 Ton 4000m Workover Rig 

 Shacman 10X4 Chassis Refit Oil Field Workover Rig Well Repairing Truck, Workover Rig, Oil Field 

XJ900 workover rig is truck-mounted drilling equipment. The chassis adopts home-made 6×6, 8×8 special chassis or 10×8 special chassis. And based on which it is equipped with high speed diesel motor, hydraulic mechanical drive, angle gear box, drawworks assembly, two-section telescoping mast, traveling system, hydraulic and pneumatic system, etc. The workover rig is mainly used for medium and small operation in 4000m oil and water well with 73mm(2.7/8″) tubing. Also can do major workover operation with drilling rig and related components.

Model	XJ900(6×6 chassis)	XJ900(8×8 chassis)	XJ900(10×8 chassis)
Workover depth (2 7 / 8 "thicken DP)    (m)	4000	4000	4000
Overhaul workover depth (2 7/8″ DP)      (m)	3200	3200	3200
Nominal hook load           (kN)	650	600	600
The max. Loading          (kN)	900	900	900
The height of mast                       (m)	23.5	29	32
The dia. Of rope/effective number of rope     (mm/n)	Φ26/8	Φ26/6	Φ26/6
Maximum pulling speed of hook       (m/s)	1.1	1.2	1.2
The dimension of moving state (including mast)    (m)	13910×2705×4320	17140×3110×4260	18720×3110×4490
Weight of the whole set              (kg)	31490	39970	49500

1.The chassis adopts home-made special workover rig chassis, easy to ride and operate and good cross country performance. 2. Adopts 29m or 32m two-section telescoping mast, monkey board, has three kinds of adjusting height (17.6m, 20.2m, 21.2m), can install simple rig. 3. The main drum of drawworks adopts integral LIBUS groove to line regularly. The auxiliary brake adopts S 122 hydraulic brake and can equipped with pneumatic water cooling disc brake. 4. The control system of electric, hydraulic and pneumatic adopt centralized control, easy to operate. The main parts and components adopt imported original famous brand products to ensure product reliability.The vehicle is a special vehicle for oil field operation. The main equipment is derricks, winch and so on. It is mainly used for oil field workover operation.                                      

Products Technical Specification
Product Name		DTYJ5460TXJ  workover rig truck
Chassis Dimensions(mm)
Overall chassis length		18340
Cab width		2550
Cab height (unladen)		4000
Wheel base		1800+4975+1400+1400
Front over hang		1525
Rear over hang		1650
Maximum velocity (Km/h)		89
Chassis weights (kg)
G.V.W		45600
Curb weight(chassis)		45470
Engine	Type	weichai WP12.430E62
	Emission level	Euro 3-6
	Max.power	316Kw
	Displacement	11596
	System	Water cooled,turbocharged,after cooled,direct injection,High pressure common rail fuel system,heating for starting.
Brake System	Full air brake system, split pneumatic circuit , parking spring brake acting on rear axles , exhaust  brake,ABS.
Cab	truck chassis, all welded steel cab of tilt type,antirust covering.Mechanical driver's seat, wind shield wiper and washer, rear mechanical cab suspension,air conditioning system
Tyres	315/80R22.5 18PR
Fuel	Type	Aluminum fuel tank
	Capacity	400L
Body	Refit configuration: 18340mmx2550mmx4000mm, Q235. The vehicle is a special vehicle for oil field operation. The main equipment is derricks, winch and so on. It is mainly used for oil field workover operation.

Single Mast Double drum 40ton Fast Rapid  No-Guyline pulling Unit  hoist Workover rig  

Hot Oil Unit Flushing Well and Paraffin Removal Truck Boiler and Pump Unit No Water Tank for Oil Well 

 

Certifications

Packaging & Shipping

FAQ

1.Are you trading company or manufacturer ? 

We are Group Corporation manufacturer ,have Group Factories Contractor.

2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.

3. What's the delivery time and can you lower the price? 
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
 

4.Can you supply some quick-wear parts? 

Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
 

6.Do you have any used products for sale? 

We have products in stock for choices,the prices are favorable,we'll show you our stock products if you need. 

7.What's the payment terms?

TT 30% as deposit, balance before shipment by TT or at sight.

8. How to guarantee customers get the goods smoothly after they payment? 
Don't worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don't delivery products, the deposit will be returned to you. 

9.How can you ensure the quality of the products? 

Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.