| After-sales Service: | 24 |
|---|---|
| Warranty: | 24 |
| Fuel: | Diesel |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier (Truck mounted Water Treatment And Purification System Hot Water Boiler Live Water 1500L /h Drinking Water 1000L /h
Special Vehicle Overall Size 9480,11585,10165 x 2540 x 3800 (mm)
|
Chassis |
Chassis Model |
QL1251FTFZY |
|
Wheelbase |
4650+1350 mm 4650+1370,5700+1370,5100+1370mm |
|
|
Gross Weight |
25000kgs |
|
|
Curb Weight |
14500kgs |
|
|
Engine |
Engine Model |
6HK1-TCG60 ,221 KW/301HP |
|
Type |
Multi cylinder, 4stroke, 6-cylinder water cooled, direct fuel injection, turbo-diesel engine. |
|
|
Displacement Volume(ml) |
7790 |
|
|
Net Power(KW) |
Min 300 HP at rated RPM |
|
|
Fuel Type |
Diesel |
|
|
Emission Standard |
Eour 6 |
|
|
Clutch System |
Model |
Single Plate, dry friction |
|
Steering System |
Power Steering |
Left hand driving, |
|
Transmission System |
Manually Operated |
RT-11509C |
|
Brake System |
Service Brake |
Hydraulic disk brakes |
|
Park Brake |
Air Brake & Hand Brake |
|
|
Suspension System(Front & Rear) |
Semi-elliptical leaf spring with telessopic shock absorber (both front & rear) |
|
|
Type |
Type Quantity |
10 pcs |
|
Type Specification |
295/80R22.5 18PR |
|
|
Cabin |
The cabine of 3 person (including driver), cruise control, ABS, air conditgioning, electric glass, adjustable headlights, USB, etc. |
|
|
unpurified water tank |
Tank Capacity |
3 m³ |
|
Tank Material |
SS304 Stainless steel |
|
|
Purified Water tank |
Tank Capacity |
1.5 m³ |
|
Tank Material |
SS304 Stainless steel |
|
|
PTO |
PTO power take-off take |
|
|
Paint |
Tank color is according to client's requirements. |
|
Thermal insulation of large board car: the total heat transfer coefficient of the car is less than 2.5 W/m2 · ºC
The wall panels of the large carriage are of sandwich structure
The inner and outer skins are 1.2mm aluminum plates, and the middle is rigid polyurethane foam sandwich layer and aluminum profile reinforced beam skin, aluminum alloy skeleton and polyurethane foam, which are bonded with special large plate adhesive, and then hot pressed once by the large plate press
Wall panel thickness 51.4mm
High temperature resistance of wall panels: can withstand high temperatures of 70 ºC without degumming;
Low temperature resistance of wall panels: can withstand -55 ºC low temperature without degumming;
Sunlight resistance of wall panel: under the condition of 1120w/m2 of radiant intensity, deformation, stickiness, cracking, damage, etc. will not occur;
Mold resistance of wall panels: able to withstand the harmful effects of various molds and fungi;
Humidity resistance of wall panels: able to withstand a relative humidity of no more than 95% (40 ºC);
Salt spray corrosion resistance of wall panels: able to resist the harmful effects of salt spray corrosion environment in coastal areas of China;
Wall panel flame retardancy: It has flame retardancy and can self extinguish when left on fire;
Environmental friendliness of wall panels: meeting E0 level environmental protection requirements
The large plate structure has good airtightness (water and air tightness), thermal insulation, sound insulation, waterproof, fireproof, heat radiation resistant, salt spray corrosion resistant, insect resistant, and other performance; By optimizing the reasonable layout of the skeleton and the design of the skeleton structure, the optimal values between the stiffness, strength, and weight of each board are achieved, which not only ensures the overall strength, stiffness, and weight requirements of the car body, but also achieves the goals of thermal insulation and sound insulation, fully reflecting the superiority of the large board car. When designing, full consideration should be given to the requirements for thermal insulation performance. Heat blocking should be installed at all skeleton positions inside the large panel to reduce heat loss in the carriage and improve the thermal insulation performance of the carriage
The carriage has sufficient strength and stiffness to withstand the vibrations and impacts of the car during operation. The structure of the large panel shelter complies with GJB6109-2007 "General Specification for Militry Shelters"
The boards of the carriage are connected by riveting and high-strength bolts to form a whole, ensuring that the carriage has sufficient strength and stiffness to withstand the vibration and impact of the car during driving. The structure of the large board is shown in the following figure. All openings should be sealed; All cables and pipelines are sealed with insulation
Both the inner and outer skins are made of aluminum alloy, a thin sheet of aluminum, and anodized. The carriage wall panel has good sealing, heat insulation, and good strength and stiffness. The pressing of the carriage wall panel is controlled using our factory's typical process, and the structural design is carried out in accordance with GJB5113 "General Specification for Logistics Box Cars" to ensure that after various tests, the surface and structural components of the carriage are free from defects such as bending, warping, fracture, delamination, detachment, damage, damage, and permanent deformation.
Wall panel flatness: 1600mm × Within the range of 700mm, the flatness error shall not exceed 1.5mm,
Wall panel strength: can withstand uniformly distributed static load: ≥ 2kN/m2; Concentrated static load: area of 300mm × 600mm, static
Load ≥ 3kN.
Painting treatment of the interior surface of the car
The interior floor of the carriage is made of patterned aluminum plates
heater
Rated pressure: ≥ 0.7 MPa;
Wire section requirements: 6 square millimetre
Overall dimensions (length × wide × Height: ≤ 410x260x70 mm;
Net weight: ≤ 3.3 kilograms
Rated power: ≤ 8500W;
Rated voltage: 220V;
Operation mode: touch control;
Applicable number of people: ≥ 4 or more
Small generator
Rated power: ≥ 3KW
Backup power: ≥ 3 2KW
Rated frequency: 50HZ
Rated voltage: 380V
Structure type: open frame/hand push type
Power factor: 1.0
Number of phases: single-phase/three-phase
DC output: ≥ 12-8.3 (V-A)
Working time: ≥ 8H
Machine weight: ≤ 77kg
External dimensions: ≤ 660 * 550 * 600mm
Water purifier
Net water flow rate: ≥ 1000L/h (25 ºC);
Suitable water quality: surface water of three types;
Effluent quality: drinking water standard;
Overall dimensions (length × wide × Height: ≤ 1750mm × 800mm × 1700mm;
Weight: ≤ 750kg.
The system adopts a "pre-treatment+single stage reverse osmosis" water treatment process, with a reasonable design, stable operation, and water production quality that meets the requirements.
The equipment is easy to install, use, operate, and maintain; The characteristics of stable operation, energy conservation, environmental protection, and high degree of automation
Outlet: NPT3/4 ″
water tank
The water tank is divided into a clean water tank and a raw water tank, both of which are made of 304 stainless steel. The total effective volume of the water tank is ≥ 4.5m ³
Number of configured clean water tanks: 1, with a capacity of ≥ 1.5m ³ , Internally, it is treated with drinking water through water purification equipment;
Number of configured raw water tanks: 1 unit, with a capacity of ≥ 3m ³ , Internally, there are three types of surface water;
The boxes are all welded from 304 stainless steel plates. The top of the box is equipped with an opening that can serve as a water filling hole for injecting water into the box. The hole cover and opening are sealed with rubber rings and connected with bolts;
There are 3-4 folding wave guards inside the box. The box is equipped with inlet filtration, outlet filtration, overflow, and sewage discharge devices;
A drainage outlet is set at the lowest point of the water tank to ensure that the water in the tank can be discharged completely during storage;
Water Purification Vehicle (Truck mounted Water Treatment And Purification System Hot Water Boiler
Live Water 2500L /h Drinking Water 1000L /h
Truck-Mounted Water Filtration System
Portable Water Treatment Units
water tank
The water tank is divided into a clean water tank and a raw water tank, both of which are made of 304 stainless steel. The total effective volume of the water tank is ≥ 4.5m ³
Number of configured clean water tanks: 1, with a capacity of ≥ 1.5m ³ , Internally, it is treated with drinking water through water purification equipment;
Number of configured raw water tanks: 1 unit, with a capacity of ≥ 3m ³ , Internally, there are three types of surface water;
The boxes are all welded from 304 stainless steel plates. The top of the box is equipped with an opening that can serve as a water filling hole for injecting water into the box. The hole cover and opening are sealed with rubber rings and connected with bolts;
There are 3-4 folding wave guards inside the box. The box is equipped with inlet filtration, outlet filtration, overflow, and sewage discharge devices;
A drainage outlet is set at the lowest point of the water tank to ensure that the water in the tank can be discharged completely during storage;
1.Are you trading company or manufacturer ?
We are Group Corporation manufacturer ,have Group Factories Contractor.Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.
Keystone Vessel Industrial Gas Cylinders| ISO Tank| Pressure Vessel| UN Portable Tanks- Dong Runze Special Vehicle
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}