Airport Special Equipment Catering Truck (SUZU Scissors High Loader 4500KG Refrigerated Food Van 7500X2480X2400mm)

• Customization: Available
• After-sales Service: 24hours
• Warranty: 24months
• Model NO.: WTJ5160JSPA
• Certification: CCC
• Payload: 4500kg
• Emission Standard: Euro 5-6
• Transmission Type: Manual
• Horsepower: 251-350hp
• Fuel: Diesel
• Bearing Capacity: Small
• Car Type: Van
• Condition: New
• Working Height of Platform (mm): 2650 ~ 6000
• Rated Load Body (Kg): 4500
• Rated Load of Front Platform (Kg): 1550
• Rated Load of Fixed Part of Front Platfo: 95
• Body (mm): 7500X 2480 X2400
• Transport Package: Roro
• Specification: WXQ5160JSP
• Trademark: DRAU
• Origin: China
• HS Code: 8705909990

Product Description

Airport Special Equipment Catering Truck (  SUZU Scissors High Loader 4500KG Refrigerated Food Van 7500x2480x2400mm

Retrofitted from  SUZU second class chassis,  catering truck is advanced in technology, safe and reliable for use with all performances better than similar products retrofitted from domestically produced chassis.

It is applicable to A300,A310,A318,A319,A320,A330,A340,B707,B727,B737,

B747,B757,B767,B777,DC8,1L-18,1L-62,MD11,MD80 type aircraft except A380.

•  WTJ5160JSPA

 

Catering truck is self-containing unit and be mounted on commercial truck chassis and have the necessary provision for lifting and lowering of the van-body by hydraulically scissor mechanism.  During lifting and loading procedure the unit to be stabilized through stabilizer jacks, which are completely welded to the Hi-Lift frame and become part of the Hi-Lift unit.  The unit is designed to interface easily and promptly with aircraft galley door, while providing the maximum safety to the personnel and protection to the aircraft structure.  There are three types to suit for the aircraft with service door heights between 1400-5800mm, that's TD40SP, TD50SP, TD60SP.

 

Applicable for aircraft:

 

A300,A310,A318,A319,A320,A330,A340,A350,A380 (MIDDLE LEVEL),B707,B727,B737,B747,B757,B767,B777,B787,DC8,DC9,1L-18,1L-62,MD11,MD80,and A380.

 

Gearbox manufacturer Qingling Automobile Co., Ltd

Model mld-6q

Working height of platform (mm): 2650 ~ 6000

Rated load of car body (kg): 4500

Rated load of front platform (kg) 1550

Rated load of movable part of front platform (kg) 600

Left and right adjustment range of front platform moving part (mm): 0 ~ 600

Expansion and adjustment range of movable part of front platform (mm) 0 ~ 500

Fixed part size of front platform (L × w) (mm) 1200 × 2190

Front platform movable part size (length × width) (mm) 1130 × 1200

Curb weight (kg) 14000

Boundary dimension (L × w × h) (mm): 10115 × 2500 × 3830

Other performance-- 

Model: ql1180xqfry

External dimension of car body (L × w × h) (mm): 7500 × 2480 × 2400

Engine emissions: exhaust pollutants meet the requirements of GB 17691-2005   EURO V and exhaust smoke meets the requirements of GB 3847-2005

Rated load of fixed part of front platform (kg) 950

 

MH/T6016-2017 Aircraft Catering truck

 

JG5099-1988Safety Regulations for Aerial Work MachineryGB7258-2004Safety Technical Conditions of Motor VehicleAHM910Basic Requirements of Ground Support EquipmentAHM927Basic Safety Requirements of Ground Support Equipment

 

Refrigeration system

1. Equipped with US carrier or thermo king cooling system, it can automatically open/stop and self-inspection.
2. Refrigeration system form: independence, diesel drive, coupling drive, semi-closed compressor unit, pipe coil evaporator

 

1. Monitoring system
   1. The monitoring system is made of mainframe and camera.
   2. Equipped with 500G hard disc.
   3. It also equip with GPS positioning system.
2. Electric system
   1. Install ground operation cabinet on the left truck and set up control box in van body , in the driving cab have safety indicated lights.
   2. Adopt relay logic control circuit.
   3. Set up safety protection for circuit.
   4. Install the indicated light in the driving cab, it can show the change of outriggers.
   5. Set up the emergency quenching circuit and control circuit with emergency electric pump.
   6. Both the relay and switches are imported from Europe and the United States, and the switch is waterproof.
   7. The emergency stop switch (and the indicator light) is installed in the upper right corner of van body ,the emergency stop switch has two levels
   8. The solenoid valve and overflow valve is equipped with emergency button, which can be used to realize the movement of hydraulic cylinder when the solenoid valve is broken.
   9. Attach power switch of emergency electric pump.
3. Hydraulic system
   1. The structure is simple and reasonable layout, it adopt Park seamless steel pipe and hose fitting. It has two set of hydraulic system, one is control van body and outriggers; another is control platform scale, it has main power system, electric pump, hand pump, artificial overpower system, it can offer emergency operation.
   2. Main hydraulics is used of American and European brands, the hydraulic reversing valve is

 

one-piece with hand and electrics. There area filter between hydraulic pump and control valve, every outlet has two-way lockup valve.

1. The whole lifting weight reach 4000kg, in rated load, lifting speed is 80mm/s-150mm/s, the electric pump for German can lift 4000kg.
2. Adopt Park hydraulic pipeline and famous hydraulic cylinders
3. Adopt hydraulic gear pump, its drive by power takeoff.
4. Adopt I or II class lifting cylinder with chrome layer.
5. The outriggers adopt "H" type.
6. Control valve adopt hand and electric magnetic valve.
7. Equipped with two pieces of operation platform.
8. The volume is hydraulic oil tank is 100L, oil-box install on hand valve.
9. Hydraulic system is equipped with pressure gauge.
10. Hydraulic system is equipped with emergency pump, hand pump.

1. Emergency and traction
   1. Electric emergency system
      1. It can operate the lifting and lowing of platform and van body and outriggers.
   2. Manual emergency system

It can make the van body up and down and take back outriggers, completion time is more than 5 minutes.

1. Traction equipment

The front and rear end vehicle are installed coupling device.

1. Safety interlock and other safety devices
   1. Driving cab
      1. Equip with PTO switch and indicator light .
      2. It is equipped with indicator light, which can take back the outriggers

6.1.2 Equip with temperature display of refrigerating unit and temperature control panel 6.1.3Install the display screen of monitor system

6.1.4 As per requirement of clients, it can equip with the necessary switches

1. Ground operation box
   1. The operation box is located in the left outrigger.
   2. Should equip with button of outriggers and van body, power switch, lighting switch, emergency electric pump switch, stop button, indicator light.
2. Control box for van body
   1. The operation box is located at the right side of van body.
   2. The van body should be settled up the button of extensive and movable platform, van body, emergency pump, stop button, engine switch, lighting switch and power indicator lights
3. Safety interlock
   1. When PTO is workable, if the transmission put into gear, the vehicle can't be moved.
   2. If the supporting legs can't back to the original location, the vehicle can't be moved.

 

1. When the van body lifting, will sent sound and light alarm
2. If the van body can't back to the original location, the outriggers can't be taken back.
3. If extensive platform can't back to the original location, the van body can't be lowed down.
4. When reversing, should equip with audible warning signal.
5. Should equip with joint control button
6. If the supporting legs can't back to the original location, the van body can't be lifted.
7. The rubber-sleeve of front platform install proximity switch, sensing distance is 100mm
8. The internal and external van body control interlock device of its lifting.
9. Other safety devices
   1. Equip with two pieces of 55W spot lightings, and install on the both sides of van body(option) 6.5.2 The rear of the vehicle is fitted with a collision tube,the thickness is 10mm,the length is 850mm. 6.5.3 There is a mechanical safety brace at the rear end of the van body .
   2. As per the customer's request, it can equip with crash barrier on air condition(option)
   3. As per the customer's request, it can equip with crash barrier on hydraulic system(option)

 

Project		Performance Index	Performance Index
Engine	Manufacturer	Qingling Is.uzu (Chongqing) Engine Co., Ltd	Isu.zu (Chongqing) Engine Co., Ltd
	Model	6HK1-TCL	6HK1-TCL
Transmission case	Manufacturer	Qingling Motors Company Limited	Allison Transmission
	Model	MLD-6Q	Allison 2500  ATM
Working height of platform (mm)		2650~6000	2740~6020
Rated load of car body (kg)		4500	4000
Rated load of front platform (kg)		1550	1800
Rated load of movable part of front platform (kg)		600	600
Left and right adjustment range of front platform moving part (mm)		0~600	0~800
Expansion and adjustment range of movable part of front platform (mm)		0~500	0~500
Fixed part size of front platform (L × w) (mm)		1200×2190	1400×2400
Front platform movable part size (L × w) (mm)		1130×1200	1120×1200
Curb weight (kg)		14000	14000
Boundary dimension (L × w × h) (mm)		10115×2500×3830	10320×2500×3830
Other properties		--
Chassis	Manufacturer	Qingling Isu.zu (Chongqing) Engine Co., Ltd	Qingling Isu.zu (Chongqing) Engine Co., Ltd
	Model	QL1180XQFRY	QL1180XQFRY
External dimension of car body (L × w × h) (mm)		7500×2480×2400	7500×2480×2400
Engine emissions		GB17691-2005 GB 3847-2005 EURO 5	GB17691-2005 GB 3847-2005 EURO 5
Rated load of fixed part of front platform (kg)		950	1200

Project performance index

Configuration V (2019-10-25), configuration IV (2019-10-20), configuration III (2017-12-28), configuration II (2017-09-08), configuration I

Engine manufacturer Qingling Isu.zu (Chongqing) Engine Co., Ltd

Model: 6hk1-tcl 6hk1-tcl 6hk1-tcl 6hk1-tcl 6hk1-tcng40

Gearbox manufacturer Qingling Automobile Co., Ltd. Allison transmission holdings, Inc. Allison transmission holdings, Inc. Qingling Automobile Co., Ltd

Model mld-6q 2500 2500 mld-6q mld-6q

Working height of platform (mm): 2580 ~ 6200 2580 ~ 6200 2720 ~ 6100 2720 ~ 6100 2730 ~ 6000

Rated load of car body (kg): 5000 5000 4000 4000

Rated load of front platform (kg): 1600 1600 1000 1000 1000

Front platform movable part rated load (kg): 600 600 400 400 400

Left and right adjustment range of front platform moving part (mm): 0-800 0-800 0-600 0-600

Expansion and adjustment range of movable part of front platform (mm): 0-600 0-600 0-600 0-600 0-600

Front platform fixed part size (length × width) (mm): 2050 × 2300 2050 × 2300 1490 × 2300 1490 × 2300 1490 × 2300

Front platform movable part size (length × width) (mm): 950 × 1200 950 × 1200 1100 × 1200 1100 × 1200 880 × 880

Curb weight (kg): 13600 13600 13700 13700 13430

Boundary dimension (L × w × h) (mm): 10435 × 2500 × 3800 10435 × 2500 × 3800 10350 × 2500 × 3800 10350 × 2500 × 3800 9665 × 2500 × 3800

Other properties -----

Chassis manufacturer Qingling Automobile Co., Ltd

Model: ql1180xqfry; ql1180xqfry; ql1180xqfry; ql1180xqfry; ql1160aqfry

External dimension of car body (length × width × height) (mm): 7500 × 2500 × 2400 7500 × 2500 × 2400 7500 × 2500 × 2400 7500 × 2500 × 2500 × 2400 7200 × 2500 × 2400

Engine emissions: exhaust pollutants meet the emission limits of phase V of GB 17691-2005, and exhaust smoke meets the free acceleration method of GB 3847-2018

Rated load of fixed part of front platform (kg): 1000 1000 600 600

Working Overview

 

Certifications

Packaging & Shipping