Dongfeng Aircraft Tanker Truck Refueller (25m3 JET A-1 Fuel Tank Aviation Kerosene, Aviation Gasoline, Jet Oil 6600 US Gallon Refueler)

Product Description

Dongfeng Aircraft Tanker Truck ( 25m3 JET A-1 Fuel Tank  Aviation Kerosene, Aviation Gasoline, Jet Oil 6600 US Gallon Refueler)

Aluminum 25000L Helicopter Aircraft Tanker (Aviation Kerosene, Gasoline, Jet Fuel Oil 6600US Gallon Refueler Aircraft Tanker)

 

 

 Main performance index:

Project		Performance index
Chassis	Manufacturer	Dongfeng Commercial Vehicl
	Model	DFH1260D
Engine	Manufacturer	Dongfeng Commercial Vehicle
	Model	DDI75E300-60
Transmission Case	Manufacturer	Shaanxi fast Gear Co., Ltd
	Model	9JS
Rated capacity of oil tank (L)		25000
Maximum oil filling flow of reel hose (L / min)		1000
Maximum flow rate of platform double hose refueling (L / min)		/
Accuracy of flowmeter (%)		±0.2
Single tube pumping flow of reel (L / min)		450
Aviation kerosene filtration accuracy		Comply with the latest edition of ei1581
Overall dimension (L)×wide×Height (mm)		10640×2580×3250
Maximum speed (km / h)		30
Braking distance (m)		10.7
Curb weight (kg)		12800
Other performance		/
Lifting range of refueling platform (mm)		/
Engine emissions		Meet the requirements of emission limits in phase 6B of GB 17691-2018

 
 

Serial number	Assembly name	Assembly model	Production unit	remarks
1	Chassis	DFH1260D	Dongfeng Commercial Vehicle Co., Ltd	--
2	engine	DDI75E300-60	Dongfeng Commercial Vehicle Co., Ltd
3	Transmission	9JS	Shaanxi fast Gear Co., Ltd
4	Oil pump	03H1-GR	THE GOMAN-RUPP COMPANY MANSFIELD,OHIO
5	Flowmeter	BM08BAN-G1	Chongqing Naide Industry Co., Ltd
6	Filter separator	HV1838MHAN3	Parker Hannifin Corporation Velcon Filtration Divison
9	Oil tank	TANKER2701	Yangzhou CIMC Tonghua Special Purpose Vehicle Co., Ltd
11	Steering shaft	DF551S	Dongfeng Dena axle Co., Ltd
12	Drive shaft	DF435	Dongfeng Dena axle Co., Ltd
13	Tires	295/80R22.5 18PR	Fengshen Automobile Co., Ltd

 
Main assembly structure and main technical parameters

engine	Type			In line six cylinder, high pressure common rail, direct injection Turbocharged intercooler and diesel engine	transmission case			Type	mechanical
								Gear number and transmission ratio	9 Two forward gears 11.020,6.550,4.640,3.360 ,2.460,1.950 ,1.380 ,1.000 ,0.730 1 It's a reverse gear :11.670
	Maximum net power kW / R / min			215/2300
	Maximum torque n · M / R / min			1250/1200 ~1700
	Minimum fuel consumption g / kW · H			--				Control mode	Manual
Cab type				Flat head	Number of passengers				2
Total length mm				10640	Total width mm				2580
Total height mm				3250	Curb weight kg				12800
Total mass kg				32930	Maximum speed km / h				30
Approach angle (°)				15	Departure angle (°)				8.5
wheelbase		Tractor mm	Axis I-II	5350	Track width	Tractor mm			2030/1860
			Axis II - III	1350		Trailer mm			--
		Trailer mm		--	Minimum ground clearance mm				200
Front suspension mm				1460	Rear suspension mm				2480
Outer diameter of channel circle mm				23800	Pressure refueling flow L/min		Reel single tube		1000
							Platform single pipe		--
Rated volume of oil tank L				25000			Reel double tube		--
Inner diameter of pressure refueling hose mm				50			Platform double tube		--
Inner diameter of gravity refueling hose mm				38	Gravity refueling flow L / min				210
Flowmeter accuracy%				0.2	Aviation kerosene filtration accuracyμm				Comply with the latest edition of EI 1581
Lifting range of platform mm

Oil tank capacity parameter

Serial number	Test items	Design value	Standard requirements	Measured value	Conclusion	remarks
1	Maximum capacity of oil tank L	27000	--	26960	P	--
2	Rated capacity of oil tank L	25000	≥ design value	25100	P
3	Remaining oil capacity L	600	≥1%	540	P
4	Expansion capacity L	1400	3%~10%	1320	P

Performance test of reel single pipe pressure refueling (with pressure stabilizing valve)

Serial number	Working condition	project	Technical requirements	Measured value	Conclusion	remarks
1	Connect the pressure refueling connector of reel hose with the oil inlet of tank body, start the oil pump and carry out pressure refueling	Online control of air pressure Mpa	0.4	0.4	P	-
2		Vacuum degree of oil pump inlet MPa	-	-0.02	P
3		Oil pump outlet pressure Mpa	-	0.60	P
4		Venturi pressure Mpa	-	0.04	P
5		End pressure of reel hose MPa	-	0.02	P
6		Pressure difference of filter separator MPa	-	0.02	P
7		Refueling flow L / min	1000	1012	P
8		Engine speed r / min	-	880	P
9		Refueling start time s	10~15	11.58	P
10		Closing time s	3~5	3.56	P
11		Over flow L after diedemann closes the pressure control valve	≤200	106	P

Performance test of pressure refueling for single tube of reel (without pressure stabilizing valve)

Serial number	Working condition	project	Technical requirements	Measured value	Conclusion	remarks
1	Connect the pressure refueling connector of reel hose with the oil inlet of tank body, start the oil pump and carry out pressure refueling	Online control of air pressure Mpa	0.40	0.4	P	-
2		Vacuum degree of oil pump inlet MPa	-	-0.02	P
3		Oil pump outlet pressure Mpa	-	0.60	P
4		Venturi pressure Mpa	-	0.04	P
5		End pressure of reel hose MPa	-	0.02	P
6		Pressure difference of filter separator MPa	-	0.02	P
7		Refueling flow L / min	1000	1021	P
8		Engine speed r / min	-	880	P
9		Refueling start time s	10~15	13.51	P
10		Closing time s	3~5	3.59	P
11		Over flow L after diedemann closes the pressure control valve	≤200	107	P

Similar Keywords: fuel tanker truck, fuel refueling truck, diesel truck, mobile diesel tanker, fuel bowser, petrol tank. 

 

 

Helicopter Refueling Truck, Refueler Bowser, Fuel Transfer Tanker, Aircraft Refuel Truck

Certifications

 

 

Packaging & Shipping

FAQ

1.Are you trading company or manufacturer ? 

We are Group Corporation manufacturer ,have Group Factories Contractor.

2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.

3. What's the delivery time and can you lower the price? 
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.

4.Can you supply some quick-wear parts? 

Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.

6.Do you have any used products for sale? 

We have products in stock for choices,the prices are favorable,we'll show you our stock products if you need. 

7.What's the payment terms?

TT 30% as deposit, balance before shipment by TT or at sight.

8. How to guarantee customers get the goods smoothly after they payment? 
Don't worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don't delivery products, the deposit will be returned to you. 

9.How can you ensure the quality of the products? 

Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.