30FT T50 Un Portable Tank for Ethylene Oxide (32K8 UN 1040 PUF Cold Plate Insulated 10bar ISO Tank Container)

Product Description

 30ft T50 UN Portable Tank for Ethylene Oxide  ( 32K8 UN 1040 PUF Cold Plate Insulated 10bar ISO Tank Container) 

Detailed Photos

Images of T50 Un Portable Tank For Ethylene Oxide Un1040
30FT /40Foot ISO Tank Container T50 UN Portable Tank for Ethylene Oxide UN1040 Stainless Plate Insulated PUF
MAWP 10bar T50 UN Portable Tank 32K8
Price for refer only. Final Price Offer Discount.

Ethylene container transport solutions using 30ft 40ft Container TankEthylene Oxide Transport Tank

 Images of T50 Un Portable Tank For Ethylene Oxide Un1040
Chemical Tank Container 

Customized

T Code System Classifications for ISO Tank Containers

 

The IMO classifications for ISO Tank Containers has been replaced by the 'T' code system.

The T-Code system specifies the test pressure of each type of tank container, its shell thickness, the pressure relief set-up and the bottom and top outlet arrangement. T-Code instructions apply to dangerous goods in classes 1 and 3 through 9. Class 2.

The T-Code system for tank containers was introduced in 2001. The T-Code system identifies tank containers from T1 through T22 and identifies the type of cargoes each container is designed to carry.

ISO tank containers have to be manufactured in accordance with strict international codes fCryogenic Tank Container T70or worldwide carriage of by liquids whether by land or sea.

Whilst the following isn't a complete listing of the IMO types, it provides an indication of the original system of classification.

IMO Type 1 - Hazardous Tanks - approved for transportation of substances of Class 1 and Classes 3 through 9 where the liquids have a flashpoint of less than 0°C. Some examples of the types of liquids include explosives, flammable liquids, corrosive and toxic substances.

IMO Type 2 - Low Hazardous Tanks - approved for transportation of Class 3 substances that have a flashpoint of 0 - 61°C. Some examples of combustible liquids include diesel and cooking oils.

IMO Type 5 - Gas Tanks -  approved for transport of non-refrigerated liquefied gases of Class 2.

 Portable tank instructions T1 to T22  T Code System for ISO Tank Containers and specifications:

T-Code	Minimum Test Pressure (bar)	Minimum Shell Thickness	Pressure-Relief Requirements	Bottom Opening Requirements
T1	1.5	> or = 6mm	normal	2 shut-off devices (Int + Ext)
T2	1.5	> or = 6mm	normal	3 shut-off devices (Int + Ext + cap/blank)
T3	2.65	> or = 6mm	normal	2 shut-off devices (Int + Ext)
T4	2.65	> or = 6mm	normal	3 shut-off devices (Int + Ext + cap/blank)
T5	2.65	> or = 6mm	normal + rupture disc	Not Allowed
T6	4	> or = 6mm	normal	2 shut-off devices (Int + Ext)
T7	4	> or = 6mm	normal	3 shut-off devices (Int + Ext + cap/blank)
T8	4	> or = 6mm	normal	Not Allowed
T9	4	6mm	normal	Not Allowed
T10	4	6mm	normal + rupture disc	Not Allowed
T11	6	> or = 6mm	normal	3 shut-off devices (Int + Ext + cap/blank)
T12	6	> or = 6mm	normal + rupture disc	3 shut-off devices (Int + Ext + cap/blank)
T13	6	6mm	normal	Not Allowed
T14	6	6mm	normal + rupture disc	Not Allowed
T15	10	>or = 6mm	normal	3 shut-off devices (Int + Ext + cap/blank)
T16	10	> or = 6mm	normal + rupture disc	<3 shut-off devices (Int + Ext + cap/blank)/td>
T17	10	6mm	normal	3 shut-off devices (Int + Ext + cap/blank)
T18	10	6mm	normal + rupture disc	Not Allowed
T19	10	6mm	normal + rupture disc	3 shut-off devices (Int + Ext + cap/blank)
T20	10	8mm	normal + rupture disc	Not Allowed
T21	10	10mm	normal	Not Allowed
T22	10	10mm	normal + rupture disc	Not Allowed

 T Code System for ISO Tank Containers and specifications:

In addition to the above types of ISO tank container, there are 2 others, namely, a T50 and a T70.

The T50 is a gas tank and has a minimum test pressure of 57.6 bar. Under the IMO system, this was classified IMO5.

The T70 is a cryogenic tank container designed for carrying liquefied gases. Under the IMO system, this was classified IMO7.

Product Description

Tank container main Technical Parameters

Design Code	Chinese GB standard ISO 30FT with CCS
Capacity	34.87 m3
Liquid	UN 1040, ETHYLENE OXIDE
Max.Gross Mass	35728kgs
Loading	27198kgs
Tare Weight	8510kgs
Working Pressure	0.8MPa;1.0MPa/10bar
Design Pressure	1.0MPa
Hydro test pressure	1.3MPa
Design temp	--40-65ºC
Overall Dimension	9125*2438*2591mm
Shell Material	SS30408
Head Material	SS30408
Head Type	Double Elliptical Heads

View more at Youtu.be and follow us.

https://youtu.be/77W3oSM7KAU

https://youtu.be/pAEXHFBdGdY

https://youtu.be/3Y0tT7nknXM

https://youtu.be/3Yb2diEGXyY

https://youtu.be/VKVIcC02974

https://youtu.be/uqva7K_GLB4

https://youtu.be/YViOkhVwMKg

https://youtu.be/II0khjBNAPs

https://youtu.be/sUpZG9wYqnU

https://youtu.be/x4GxDsDI1N0

20FT tankcontainer

30FT tank container

40FT tank container

Overall dimension(mm)

6058×2438×2438/2591

9144×2438×2438/2591

12192×2438×2438/2591

Working temperature(ºC)

-12C-50C

T14 Portable Tanks container main Technical Parameters
	20FT tankcontainer		30FT tank container	40FT tank container
Overall dimension(mm)	6058×2438×2438/2591		9144×2438×2438/2591	12192×2438×2438/2591
Working temperature(ºC)	-12C-50C

ISO 40' LNG Tank Container	Bitumen tank container	ISO 20' Tank Container
IMO 1 Shell made from 316 Stainless Steel Capacity of 12,000 - 26,500 litres nominal MAWP of 4 bar For transport of: Hazardous liquids Available in 7.65, 10, 20, or 30 foot sizes Swap-bodies 7.65m and 7.82 (30,000-35,000 litres) Heating by steam or electric heating (optional)   IMO 0 Shell made from 316 Stainless Steel Capacity of 12000 - 26500 litres nominal MAWP of 4 bar For transport of Wine Fruit Juices Vegetable Oils Mineral Oils Non-hazardous Oils Available in 20 foot / 6 metres Swap-bodies 7.65m and 7.82 (30,000-35,000 litres) Heating by steam or electric heating (optional)	IMO 2 Shell made from 316 Stainless Steel Capacity of 12,000 - 26,500 litres nominal MAWP of 1.75 bar For transport of:Low Hazardous liquids Available in 7.65, 10, 20, or 30 foot sizes Swap-bodies 7.65m and 7.82 (30,000-35,000 L) Heating by steam or electric heating   Bitumen Tank Containers Shell made from Carbon Steel Capacity of 20,000-25,000 litres nominal MAWP of 1.75 bar Low Hazardous liquids Available in 20 or 30 foot sizes Heating by direct flame, hot oil or electric heating   Cement Containers Capacity of 17.5 - 25 cubic metres Pressure discharge Road transport tank container T4,T6,T7,T8,T9, T10,T11,T14,T50 portable tank;   PE Lined steel tanks for hydrofluoric acid liquid ,hydrochloric acid ,sodium hypochlorite HCl,NaOH,NaClO liquid etc.	IMO 5 Shell made from 316 Stainless Steel Capacity of 15,000 - 25,500 litres nominal MAWP of 1.75 bar For transport of gases, including: Propane Butane Refrigerants Available in 20, 30 or 40 foot sizes IMO 7 Shell made from 316 Stainless Steel or Carbon Steel Capacity of 20,000 - 24,000 litres nominal MAWP of 8 bar For transport of cryogenic gases, including: LNG Available in 10, 20, 30 or 40 foot sizes Offshore Shell made from 316 Stainless Steel Capacity of 2,000 - 10,000 litres MAWP of 5 bar For transport of gases, including: Hazardous chemicals Acid Petroleum Available in 8 x 8 x 10 sizes

The Main Technical Parameters of Tanks (ASME Standard)
Item	Loading Medium	Model	Capacity (m3)	Design Pressure (Mpa)	Design Temperature (c)	Tank Material	Nominal Tank Thickness (mm)	Insulation	Tare weight (Kg)	Max. Gross Weight (Kg)	Dimension (LX WX H)(mm)	Loading Method
1	R134a	T50	24	1.38	-40 /+55	SA-612N	11	Sunshade	6400	34000	6058 X 2438 X2591	Down load unload
2	R22		22	2.1	-40/+50		18		8800
3	R143a		22	2.42			20		9500
4	R125		22	2.75			21		9500
5	R32		20	3.44			25		10900
6	AHF	T19	21	1.0	-40/+55	SA516M NGr.485	12	No	6900			Up load unload
7	Trichlorosilan	T14	21	0.5	-40/+50	Q345R (16MnR)	12	No	6780	34000	6058 X 2438 X2591
8	Liquid Chlorine	T50	20	1.7	-40/+50		16		8300
9			21.72	1.62			16		8900
10	Liquid Ammonia	T50	21.6	2.2	-40/+50	06Cr19Ni10	22	Packing Insulation	11970
11	SO2	T20	21	1.03	40 /+60	16MnDR	12	No	6900
12	Cryogenic Liquid	T75	19.8,20	0.75-2.35	-196/+50	Inner Tank: 06Cr19Ni10 Outside Tank:Q345R		Vacuum With Mutli-wrapped	8600/12880			Down load unload
The Main Technical Parameters of Tanks (China Standard)
Item	Loading Medium	Model	Capacity (m3)	Design Pressure (Mpa)	Design Temperature (c)	Tank Material	Nominal Tank Thickness (mm)	Insulation	Tare weight (Kg)	Max. Gross Weight (Kg)	Dimension (LX WX H)(mm)	Loading Method
1	R134a	T50	24	1.38	-40 /55	Q345 (16MnR)	12	Sunshade	6500	34000	6058 X 2438 X2591	Down load unload
2	R22		20	2.1	-40/+50		16		7850
3			24				18		9100
4	R125		22	2.75			22		9900
5	R32		22	3.44			28		12000
6			23.7		-40 /55				12700

Certifications

Packaging & Shipping

FAQ

1.Are you trading company or manufacturer ? 

We are Group Corporation manufacturer ,have Group Factories Contractor.

2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.

3. What's the delivery time and can you lower the price? 
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
 

4.Can you supply some quick-wear parts? 

Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
 

6.Do you have any used products for sale? 

We have products in stock for choices,the prices are favorable,we'll show you our stock products if you need. 

7.What's the payment terms?

TT 30% as deposit, balance before shipment by TT or at sight.

8. How to guarantee customers get the goods smoothly after they payment? 
Don't worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don't delivery products, the deposit will be returned to you. 

9.How can you ensure the quality of the products? 

Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.

 Cl2 Un1017 Max Storage Pressure 1.5MPa 21670L

 

20FT 20000liters Stainless Steel Nitric Acid Hno3, Hf Acid, Naoh Sodium Hydroxide  SS30408

 

20 Feet Q235B+PEfor Corrosive Sodium 3-Chloro-2-Hydroxypropanesulfonate 20kl Drilling Fluid Petrochemicals

for Offshore Ship Transport 55% Hydrofluoric Acid Un1790, 38% Hydrochloric Acid Un1789 (21KL 20FT 22K2 ISO TANK CONTAINER)

20FT I21cbm (21000 Liters Steel Lined LLDPE) for Vietnam Chemical Factory Acid Trailer Transportation

Anhydrous  Container 20FT 24000L

Steel Lined LDPE aslo for HCL(max 35%), NaOH (max 50%), NaCLO (max 10%), PAC (max 17%),H2SO4(60%,98%) ,HF ( 48%),H3PO4 (10%-85%),NH3. H2O,H2O2 (30%)